\xusbdfwu.sys not found.
Inf File = C:\WINDOWS\inf\oem5.inf.
Found version. DriverVer=10/03/2006,
1.0.2.9
.
version =
1.0.2.9.
inf version = 1029(decimal).
Driver file not found. Inf file version = 0.
Driver xusbdfwu.sys version: 1021 (1029).
Driver windrvr6.sys version = 8.1.0.0.Calling setinterface num=0, alternate=0.
DeviceAttach: received and accepted attach for:
vendor id 0x3fd, product id 0x8, device handle 0x1552ae0
Cable PID = 0008.
Max current requested during enumeration is 280 mA.
Cable Type = 3, Revision = 0.
Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1021.
CPLD file version = 0012h.
CPLD version = 0012h.
JTAG chain configuration
--------------------------------------------------
Device ID Code IR Length Part Name
1
01c22093
6 XC3S500E
2
05046093
8 XCF04S
3
06e5e093
8 XC2C64A_VQ44_1532
Assuming, Device No: 1 contains the MicroBlaze system
Connected to the JTAG MicroProcessor Debug Module (MDM)
No of processors = 1
MicroBlaze Processor 1 Configuration :
-------------------------------------
Version............................4.00.b
No of PC Breakpoints...............2
No of Read Addr/Data Watchpoints...0
No of Write Addr/Data Watchpoints..0
Instruction Cache Support..........on
Instruction Cache Base Address.....0x24000000
Instruction Cache High Address.....0x27ffffff
Data Cache Support.................on
Data Cache Base Address............0x24000000
Data Cache High Address............0x27ffffff
Exceptions Support................off
FPU Support.......................off
FSL DCache Support.................on
FSL ICache Support.................on
Hard Divider Support...............off
Hard Multiplier Support............on
Barrel Shifter Support.............off
MSR clr/set Instruction Support....off
Compare Instruction Support........off
JTAG MDM Connected to MicroBlaze 1
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234
XMD% dow -data u-boot.bin 0x27FC0000
XMD% con 0x27FC0000
Processor started. Type "stop" to stop processor
RUNNING>
XMD%
ERROR:MDT - MicroBlaze Pipeline Stalled executing Instruction at >> PC:
0x00000348
Try Resetting the Processor to Continue..
XMD%
I don't have any idea about that, please help me again, and excuse me.