[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Spartan3E-500, rev D board
John Williams wrote:
> Hi folks,
> Would one of you who has succesfully got PetaLinux going on the RevD
> board please be so kind as to post your EDK project, and
> Without a board here to test I'm reluctant to add official support,
> however this rev C / D issue is causing people some pain, so your
> assistance would be greatly appreciated.
Not there yet :(
But a question: what SDRAM chip is on the 3e-500-rev-c ?
I got in the meantime also a 3e-1600-rev-a which has a m46v32m16
and a 3e-500-rev-d which also has the m46v32m16.
So, just to be safe, the 3e-500-rev-c had a m46v16m16 ?
P.S. The problem is somehow in the bitfile. At least here. If I use the
bitfile from the prebuilt directory, I can use u-boot and uclinux.
But never succeeded in making a working bitfile for the
spartan-3e500-rev-d board. Only the first stage boot comes up :(
microblaze-uclinux mailing list
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/