Hi John,
The system I generated was very minimal –
I believe just:
MicroBlaze (no FPU, no cache, with FSL)
DDR2 memory
Flash controller (flash does not work –
image.bin must be downloaded by xmd!)
UART
8kb LMB
No GPIO
No Ethernet
I just wanted to see if it worked.m ~
If this system is useful to you, I’m
sure I can forward it to you – but sadly it does not contain much.
You can contact me off the mailing list,
if you like.
Cheers
John
From:
owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of kala855
Sent: Tuesday, July 10, 2007 5:01
PM
To:
microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux]
PetaLinux and ML501 - issue
Hi John Mcgrath,
I'm very interesting in port uclinux into a ml501, and I have a problem,
because I have the EDK 8.2 and I can't add the ddr2 in my project, please if
you have a bitstreams, system.mhs and the autoconfig.in, can you send this files to me ? please, and
tell me if the uclinux run in this target please, I need some information about
that. I have uclinux running into spartan3e revd boarda, but I need uclinux
into ml501 too, I need it. Please help me friend. Bye
--
John Osorio
Sirius Laboratory