Re: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2

["e.stiebler" <emu@xxxxxxxxxx>]

John Williams wrote:
> Hi Emmanuel,
>
> I've just asked Xilinx to lend us a Rev D s3e-500 board so we can add 
> support for it to PetaLinux - in the process we'll sync up the memory 
> maps across these three boards for you :)

Thanks !
I have it mostly running already, on the Spartan3e1600-64MBytes and the 
Spartan3e500-rev-D-64mbytes. All I had to do is to change the addresses 
for the DDR ram to 0x10000000, and also the cache addresses to the same.

And all occurences of the 16Mx16 DDR RAM in system.mhs to 32Mx16.
But it always takes a while to compile all of it again.

Wondering if it would be possible to have the same kernel for all four 
of them (3e1600 64MB, 3e1600 32MB, 3e500 32MB and 3e500 64MB)

Thanks
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/