[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2

Hi Otto,

Thanks for the offer.  No sign of it yet, will ping them and see.

Cheers,

John

Otto Blomqvist wrote:

Hi John,
Did Xilinx come through on the Spartan 3E Rev D loaner board ? Otherwise I can send you mine. 
In case they did, do you know approximately when it will be supported ?

Thanks !

/Otto Blomqvist
----- Original Message ----- From: "John Williams" <jwilliams@xxxxxxxxxxxxxx> 
To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Sent: Tuesday, July 17, 2007 3:40 PM
Subject: Re: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2



Hi Emmanuel,

e.stiebler wrote:
Actually, what I meant was, that we have two boards with more than 32Mbytes of SDRAM (newer Sprtan3e1600 and spartan3e500-RevD). To access all of them, we have to change and move the address-maps for those two. I was proposing the same address map as the ML401 board (DDR from 0x10000000 to 0x1fffffff, but nobody listens ;-).
I've just asked Xilinx to lend us a Rev D s3e-500 board so we can add support for it to PetaLinux - in the process we'll sync up the memory maps across these three boards for you :) 

Cheers,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ 



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ 




___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/