Re: [microblaze-uclinux] problems with "make menuconfig" menus

["moises j. cabrera" <mojuca1808@xxxxxxxxxxxx>]

hi john,

 

this is the URL of tutorial "Petalinux from Scratch" is:

 

http://developer.petalogix.com/wiki/BoardGuides/Custom/Tutorial

 

Is there some general configuration for 2.6 kernel settings??, like for 2.4 kernel that come in the tutorial above?

 

i want to download the image.bin to my board, but via XMD from EDK. And i have probe with 2.4 and 2.6 kernel but i did not have sucessful (i also have probed with ), i have message like:

 

Found romfs @ 0x2220708c
#### klimit 2221f000 ####
Moving 0x00230000 bytes from 0x2220708c to 0x2221e9a4
New klimit: 0x2244f000

 

or when i tried with FS-Boot, in my Hyperterminal window appers:

 

=================================================
FS-BOOT First Stage Bootloader (c) 2006 PetaLogix
=================================================
FS-BOOT: System initialisation completed.

FS-BOOT: Waiting for SREC image...

 

i send the u-boot.srec image, the spinning wheel appers but after that nothing happens, any message, nothing

 

I am using Spartan 3E Rev.D, are there any problems with this board??, are there some threads related with problems with this board in the "microblaze mailing-list"??

is there any tutorial for this board??

Can i use the pre-built Files of Spartan 3E rev.C for my rev.D board??

 

 

thanks

John Williams <jwilliams@xxxxxxxxxxxxxx> escribió:

> Hi,
>
> moises j. cabrera wrote:
>
> > --- Platform 
> > (MyPlatformName) Platform 
> > (RAM) Memory model 
> > [*] Console on UARTLITE 
> > < > GPIO driver 
> > < > SystemAce driver 
> > [*] Kernel cmdline support (needs new bootloader)
> > --- Debug Logging 
> > [*] Enable debug logging 
>
> This is the 2.4.x kernel config menu
>
> > but for me, appers total different options (and is the same "Processor 
> > type and features --->" option) :
> > 
> > [ ] Preemtible kernel
> > [ * ] Are you using uncached shadow for RAM?
> > [ ] Allow allocating large blocks (> 1MB) of memory
> > --- Boot options
> > ( ) Default kernel command string
> > [ ] Force default kernel command string
>
> This is in 2.6
>
> > why are so different??, does the last petalinux distribution change??, 
> > also in most other menus of kernel settings, i have the same problem,
>  
> > the options are different. When i pass to "Vendor/User settings" menu, i 
> > dont have problems, the menus are the same in tutorial and in my computer.
>
> This means the Wiki pag eyou are looking at still referes to 2.4 kernel 
> instructions, but the default is 2.6. Can you please post the URL of 
> the page you are referring to?
>
> Thanks,
>
> John

---

¡Capacidad ilimitada de almacenamiento en tu correo!
No te preocupes más por el espacio de tu cuenta con Correo Yahoo!:
http://correo.yahoo.com.mx/