Hi, thanks for the 2 sent files. This way I was able to generate a diff to what I have as RC3 of Petalinux. It is a bit more than the 1-line patch you sent before, see the attachment. > -----Original Message----- > From: owner-microblaze-uclinux@xxxxxxxxxxxxxx > [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx]On Behalf Of Kenneth > Johansson > Sent: Wednesday, November 14, 2007 11:33 AM > To: microblaze-uclinux@xxxxxxxxxxxxxx > Subject: RE: [microblaze-uclinux] [PATCH] return from interrupt. > > > Well then you need to investigate more. The patch is correct and > needed. > > but If you have the same problem with the interrupt disable I > have seen > all sort of interesting things can happen. > > you could try to run with the attaches files > arch/microblaze/kernel/entry.S > include/asm-microblaze/system.h > > > On Wed, 2007-11-14 at 09:01 +0100, Brettschneider Falk wrote: > > Hi, > > > > kenneth johansson wrote: > > > Sorry to hear you have problems but the patch is right and > > > necessary for > > > every possible combination of configurations.good to hear > it's more stable for you, but nevertheless the patch doesn't > seem to be right for all cases because > > both boot loggings I showed to you just differ in 1 line > with your 'disable_irq'. I went the safe way and did a 'make > clean all' for both of my trials. > > > > CU, F@lk > > > > > > ___________________________ > > microblaze-uclinux mailing list > > microblaze-uclinux@xxxxxxxxxxxxxx > > Project Home Page : > http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux > > Mailing List Archive : > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ > > > > >
Attachment:
entry.S.diff
Description: entry.S.diff
Attachment:
system.h.diff
Description: system.h.diff