Hi,
I am still having problem with my frame buffer driver and have some configuration questioins. Attached is bootlog. As far as I can tell, my fb driver has been registered correctly during bootup. I can see the correct physical address put in the structure. I have the frame buffer console enabled also. However I don¢t see anything on the display.
One of the Linux documents says tty0 can not be used with fb devices. And it seems the first virtual console tty1 should be use instead. Is this correct? If yes I wonder that is the cause of my problem. Although I have the tty1 node in /dev, I can only see vtcon0 under /sys/class/vtconsole. I believe normally I should see vtcon0 all the way to vtcon63, correct? If yes why don¢t I have other vtcons?
Please let me know what I am missing here. I have been
struggling with this for a while and really like to get some help.
Thanks,
Simon
#### klimit a8222000 ####
Moving 0x001c1000 bytes from 0xa8200000 to 0xa82214bc
New klimit: 0xa83e3000
Linux version 2.6.20-uc0 (simont@xsjles40) (gcc version 3.4.1 ( PetaLinux 0.20 B
uild -rc1 050607 )) #133 Thu
Feb 21 20:07:40 PST 2008
setup_cpuinfo: initialising
setup_cpuinfo: No PVR support in CPU. Using static compile-time info
set_cpuinfo_static: Using static CPU info.
setup_memory: max_mapnr: 0xaffff
setup_memory: min_low_pfn: 0xa8000
setup_memory: max_low_pfn: 0x8000
On node 0 totalpages: 32768
DMA zone: 256 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 32512 pages, LIFO batch:7
Normal zone: 0 pages used for
memmap
Built 1 zonelists. Total pages: 32512
Kernel command line: fbcon=map:0 console=ttyS0, 38400 console=tty1
OPB INTC #0 at 0xC9020000
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125824k/131072k available
Calibrating delay loop... 61.64 BogoMIPS (lpj=308224)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol
family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
acquire_console_sem()
fb_register_client()
fbcon_init_class_device()
Xilinx VGA driver (Simon Tam)
bus_add_driver() bus: platform driver : xilinxfb
Frame Buffer address : 0xCB800000
Clearing framebuffer
loading FB physical address
Loading FB control registers
Filling struct fb_info
Allocate a colour map
Register new frame buffer
info_idx : 0
fbcon owner : <NULL>
Console: switching to frame buffer device (fbcon)
regs: phys=cb800000, virt=cb800000
fb: phys=ae000000, virt=ae000000, size=1e0000
Creating tty
Creating console
Creating ptmx
Creating tty0
vcs:class_create()
vt:MAX_NR_CONSOLES 63
vt:tty_set_operations()
vt:kbd_init()
vt:console_map_init()
End of tty_io setup
Creating legacy_pty_init
Creating unix98_pty_init
bus_add_driver() bus: platform driver : uartlite
uartlite.0: ttyS0 at MMIO 0xc0000000 (irq = 3) is a uartlite
bus_add_driver() bus: platform
driver : mdm-uart
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Microblaze FSL FIFO Driver. John Williams <jwilliams@xxxxxxxxxxxxxx>
FSL FIFO[0] initialised
uclinux[mtd]: RAM probe address=0xa82214bc size=0x1c1000
Creating 1 MTD partitions on "RAM":
0x00000000-0x001c1000 : "ROMfs"
uclinux[mtd]: set ROMfs to be root filesystem index=0
bus_add_driver() bus: platform driver : i8042
i8042.c: i8042 controller self test timeout.
bus_add_driver() bus: serio driver : atkbd
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting /etc/config:
Populating /etc/config:
flatfsd: Nonexistent or bad flatfs (-48), creating new one...
flatfsd: Failed to write flatfs (-48): No such device
flatfsd: Created 3 configuration files (117 bytes)
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Starting DHCP client:
Jan 1 00:00:02 dhcpcd[42]: dhcpStart: ioctl SIOCGIFHWADDR: No such device
petalinux login: