[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] soft reset

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] soft reset
From: John Williams <jwilliams@xxxxxxxxxxxxxx>
Date: Sat, 15 Mar 2008 08:58:00 +1000
In-reply-to: <003b01c885ea$007c0b70$49070a0a@Calculon>
References: <A9C923F1-CBB1-47D3-83BD-1D81B04B33A0@xxxxxxxxxxxx> <47D9C5B9.2010409@xxxxxxxxxxxxxx> <58999.20.138.20.231.1205501737.squirrel@xxxxxxxxxxxxxxxxxx> <003b01c885ea$007c0b70$49070a0a@Calculon>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx
User-agent: Thunderbird 2.0.0.12 (Windows/20080213)

Hi Yuan,

Yuan Song wrote:

Does anybody know how to reset the micrblaze board without reconfiguring the

fpga.

For an external reset signal, just wire the pin to the proc_sys_resetcomponent.

For a software-commanded reset, connect a single-bit GPIO internally toproc_sys_reset. You can see this in the PetaLinux Spartan3E1500 and1600 reference designs.


Regards,

John

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

References:
- [microblaze-uclinux] New vendor+board with autoconfig wont co-operate with u-boot config
  - From: Olof Backing
- Re: [microblaze-uclinux] New vendor+board with autoconfig wont co-operate with u-boot config
  - From: John Williams
- Re: [microblaze-uclinux] New vendor+board with autoconfig wont co-operate with u-boot config
  - From: Olof Backing
- [microblaze-uclinux] soft reset
  - From: Yuan Song

Prev by Date: RE: [microblaze-uclinux] soft reset
Next by Date: [microblaze-uclinux] Microblaze GDB problems
Previous by thread: RE: [microblaze-uclinux] soft reset
Next by thread: Re: [microblaze-uclinux] soft reset
Index(es):
- Date
- Thread