[microblaze-uclinux] Network Error when no network is needed

["Kenneth Schultz" <klschult@xxxxxxxxxxx>]

Hello,
	I am attempting to build my first project a ublaze code running
petalinix.  My board has no network but I am still getting the following
error during the build.  Does anyone know what I am doing wrong?
Thankyou in advance,

Ken



* Miscellaneous Configuration
*
RAMFS Image (None, 64K, 128K, 256K, 512K, 1024K, 2048K, 8192K) [None]
  defined CONFIG_USER_RAMIMAGE_NONE
generic cgi (CONFIG_USER_CGI_GENERIC) [N/y/?]
cgihtml (CONFIG_USER_CGIHTML) [N/y/?]
System has very little entropy (only use /dev/urandom)
(CONFIG_POOR_ENTROPY) [N/y/?]
*
* Debug Builds
*
build debugable libraries (CONFIG_LIB_DEBUG) [N/y/?]
build debugable applications (CONFIG_USER_DEBUG) [N/y/?]
*
* Debug tools
*
tpt (CONFIG_USER_TIMEPEG_TPT) [N/y/?]
*
* Debug libraries
*
ccmalloc (CONFIG_LIB_LIBCCMALLOC) [N/y/?]

*** End of Linux kernel configuration.
*** Check the top-level Makefile for additional configuration.
*** Next, you must run 'make dep'.

make[2]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/config'
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist'
make[1]: Entering directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist'
[ -z "" ] || make ARCH=microblaze -C  oldconfig
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist'
make ARCH=microblaze CROSS_COMPILE=microblaze-uclinux- -C linux-2.6.x
dep
make[1]: Entering directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
scripts/kconfig/conf -s arch/microblaze/Kconfig
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
make[1]: Entering directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
*** Warning: make dep is unnecessary now.
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
make -C tools/ucfront
make[1]: Entering directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/tools/ucf ront'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/tools/ucfr ont'
ln -sf
/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/tools/ucfront/ucf
ront tools/ucf ront-gcc
ln -sf
/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/tools/ucfront/ucf
ront tools/ucf ront-g++
ln -sf
/petalinux/petalinux-v0.30-rc1/software/petalinux-dist/tools/ucfront/ucf
ront-ld tools/ ucfront-ld
make ARCH=microblaze CROSS_COMPILE=microblaze-uclinux- -j1 -C
linux-2.6.x  || exit 1
make[1]: Entering directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CHK     include/linux/compile.h
  GEN     usr/initramfs_data.cpio.gz
  AS      usr/initramfs_data.o
  LD      usr/built-in.o
  CC      drivers/net/xilinx_emac/adapter.o
drivers/net/xilinx_emac/adapter.c: In function `XEmac_GetConfig':
drivers/net/xilinx_emac/adapter.c:224: error:
`CONFIG_XILINX_ETHERNET_NUM_INSTANCES' undeclar ed (first use in this
function)
drivers/net/xilinx_emac/adapter.c:224: error: (Each undeclared
identifier is reported only on ce
drivers/net/xilinx_emac/adapter.c:224: error: for each function it
appears in.)
drivers/net/xilinx_emac/adapter.c: In function `probe':
drivers/net/xilinx_emac/adapter.c:1917: error:
`CONFIG_XILINX_ETHERNET_0_HIGHADDR' undeclared  (first use in this
function)
drivers/net/xilinx_emac/adapter.c:1917: error:
`CONFIG_XILINX_ETHERNET_0_BASEADDR' undeclared  (first use in this
function)
drivers/net/xilinx_emac/adapter.c:1917: warning: unused variable
`remap_size'
make[4]: *** [drivers/net/xilinx_emac/adapter.o] Error 1
make[3]: *** [drivers/net/xilinx_emac] Error 2
make[2]: *** [drivers/net] Error 2
make[1]: *** [drivers] Error 2
make[1]: Leaving directory
`/petalinux/petalinux-v0.30-rc1/software/linux-2.6.x-petalogix'
make: *** [linux] Error 1


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/