[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] PCI support for Microblaze.
I appreciate your help. See inline.
On Fri, 2008-07-11 at 10:20 +1000, John Williams wrote:
> Leonid wrote:
> > I have Spartan 3e with Microblaze 7 and I want to use PLBV46 PCI Full
> > Bridge (v1.01a) on it. Can anybody suggest where to get Linux kernel
> > which already has it supported? If I can get hold on relevant reference
> > design (EDK 10.1 is the best) it will be even better.
> > I would appreciate any information regarding PCI support on Microblaze.
> There's an ML410 reference design from Xilinx (targetting PPC) that
> shows how to configure the full bridge.
[LB] They have quite a few reference designs for PCI, but what I have
found so far doesn't include Linux. Can you point where ML410 capable
kernel with PCI support could be found? I understand, it's ppc405, but
since IP Core is the same, PCI related part must look similar.
> For MicroBlaze kernel support,
> I have some patches in a PetaLogix client tree that I can provide as a
> starting point, I'll dig them out and send them on Monday.
[LB] This is most welcome, thank you very much.
microblaze-uclinux mailing list
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/