Re: [microblaze-uclinux] FS-Boot, EDK 10.1 Spartan 500ERevD

[Olof Backing <olof.backing@xxxxxxxxxxxx>]

On 11 okt 2008, at 08.26, Hubert Bahr wrote:

>  Starting from the Petalogix reference design for the Spartan 500E  
> Rev D Starter Kit I can't get to Uboot from the FS-Boot.   The pre- 
> built images work fine.  The new images I built work fine with FS- 
> boot image from the pre-built.  But it will not boot either U-boot  
> in the flash or a new one downloaded via Kermit.  Either way it  
> hangs after the
> FS-BOOT:   Booting image...
> response.
>
> As far as I can tell the only changes from the reference are the  
> ones that XPS generated in the upgrade from 9.1.  Any suggestions as  
> to my next step will be appreciated


Have you checked the baseaddress of the uartlite (or similar)?

/Olof
--
Olof Backing
CAG Contactor AB                              Office: +46 (0)8 752 81 00
Finlandsgatan 14                             Mobile: +46 (0)70 995 98 99
SE-164 74  KISTA                                 Fax: +46 (0)8 752 05 30

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/