Re: [microblaze-uclinux] FS-Boot, EDK 10.1 Spartan 500ERevD

[Hubert Bahr <hab@xxxxxxxxx>]

I guess what you are implying is that Since FS_boot is built inside the 
XPS and U_Boot etc are built outside they don't refer to the same 
addresses.  I thought that the autoconfig script would take care of 
that?  Where would I check that?
Hubert

Olof Backing wrote:
> On 11 okt 2008, at 08.26, Hubert Bahr wrote:
>
> >  Starting from the Petalogix reference design for the Spartan 500E 
> > Rev D Starter Kit I can't get to Uboot from the FS-Boot.   The 
> > pre-built images work fine.  The new images I built work fine with 
> > FS-boot image from the pre-built.  But it will not boot either U-boot 
> > in the flash or a new one downloaded via Kermit.  Either way it hangs 
> > after the
> > FS-BOOT:   Booting image...
> > response.
> >
> > As far as I can tell the only changes from the reference are the ones 
> > that XPS generated in the upgrade from 9.1.  Any suggestions as to my 
> > next step will be appreciated
>
>
> Have you checked the baseaddress of the uartlite (or similar)?
>
> /Olof

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/