Re: [microblaze-uclinux] FS-BOOT in a compact flash

["Nathan Hillery" <nhillery1@xxxxxxxxx>]

I encountered this, too. Make sure the CF is formatted FAT16, and you
either have just the bit file at the top level or have the sys file, a
matching directory structure, and the bit file in a subdirectory. If
you're using impact, it should set that up ok (but I recall having
errors even using that tool, but at this moment can't remember what
the final culprit was). Make sure your processor isn't in reset.

Good luck!

On 10/12/08, Juan Pablo Gómez <juanwalker@xxxxxxxxx> wrote:
> Hi,  I'm using a XUP-V2Pro board and I' generate the bit file of the project
> with  FS-BOOT (I'm follow the guide of petlinux from scratch).
>
> Then I open Impact and I  generate the ace file and then I copy the ace file
> to my Compact Flash but when I connect the compact flash  the led error turn
> on!.
>
> What I should  do, any customization of FS-BOOT parameters ?
> http://developer.petalogix.com/wiki/UserGuide/Bootloaders/FSboot/CustFSboot
>
> My CF is a SILICONS SYSTEMS 128Mb that came with the Xilinx board and I use
> mkdosfs for make formats.
>
> Thank you for help me
>
> Regards, Juan Pablo
>

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/