[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] XMD debugger state: Blocked on Mem Instr
Hi,
I tried many things also with 10.1 but nothing works, I am going to
search for EDK9.2 (or maybe even EDK 9.1?) Specially when we have only
3 days left to complete our project at school ^_^;;
Thank you for your help :)
best regards,
On Tue, Oct 14, 2008 at 5:06 AM, Hubert Bahr <hab@xxxxxxxxx> wrote:
> Hi
> Have you made any progress. I found the reference design builds with no
> problems on EDK9.2 so I may fall back to it but I am going to continue
> progress on my Custom EDK10.1 as well. Do you have EDK9.2 available it may
> be quicker.
> Hubert
>
> Hubert Bahr wrote:
>
> Have you tried the pre-built for the board. I find it works. I am now
> working with A BSB generated design but in order to get it down to a size
> that fits this board I had to go into the memory controller and change the
> fifo settings to use logic instead of bram. I also changed all the
> addresses to match those of the reference design I did that by cutting and
> pasting between the mhs files of the respective designs. I installed the
> pre-built and then used the newly generated FS-boot. In this case it got
> past booting stage and reported the first few lines of the U-boot stage. It
> looks like I now need to go into U-boot to find out what it is looking
> for. I stopped at that point to check out other Xilinx environments I have
> all available from 8.1 on but they take different levels of os or are 32 bit
> instead of 64. I also have an XUP board and it has different levels of
> support in various editions. For full functionality my workstation needs
> a 64 bit release 5 os. So that Is what I prefer and thus Release 10.1
> but I do not like the Design that 10.1 generates.
> Hubert
> Monthadar Al-Jaberi wrote:
>
> Hi!
>
> Indeed I am using Spartan 3E 500 RevD Starter board from digilent on
> EDK 10.1. and am stuck :S
>
> br,
>
> On Mon, Oct 13, 2008 at 6:43 PM, Hubert Bahr <hab@xxxxxxxxx> wrote:
>
>
> Hi,
> What board and device are you using. I am also having some similar
> problems with 10.1, See the stream on FS-Boot, EDK 10.1 Spartan 500ERevD
> for my experiences. I am trying various approaches and getting different
> results. Right now I am setting up various versions of Xilinx tools to see
> how the results compare. I will report my findings.
>
> Hubert
> Monthadar Al-Jaberi wrote:
>
>
> Hi!
>
> I created a new project with EDK 10.1. The new project uses PLB. and I
> created a new software platform that contains the FS-BOOT code.
> Followed the tutorial
> http://developer.petalogix.com/wiki/BoardGuides/Custom/Tutorial as
> much as I code (they are using OBP).
>
> And when I download the bitstream I get the welcome message and
> waiting for an srec:
>
> =================================================
> FS-BOOT First Stage Bootloader (c) 2006 PetaLogix
> =================================================
> FS-BOOT: System initialisation completed.
> FS-BOOT: No existing image in FLASH. Starting image download.
> FS-BOOT: Waiting for SREC image....
> \
>
> The wheel just spins for 1 second and then stops, and when I open XMD
> from edk and type state I get this:
>
>
> ---------------------------------------------------------------------------------------
> System(0) - Hardware System on FPGA(Device 1) Targets:
>
> ---------------------------------------------------------------------------------------
> Blocked on Mem Instr
>
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
>
>
>
> ___________________________ microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
> ___________________________ microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
--
//Monthadar Al Jaberi
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/