|
I don't know what your development environment is but 9.1 only works in
32 bit mode. 9.2 works for either one. Monthadar Al-Jaberi wrote: Hi, I tried many things also with 10.1 but nothing works, I am going to search for EDK9.2 (or maybe even EDK 9.1?) Specially when we have only 3 days left to complete our project at school ^_^;; Thank you for your help :) best regards, On Tue, Oct 14, 2008 at 5:06 AM, Hubert Bahr <hab@xxxxxxxxx> wrote:Hi Have you made any progress. I found the reference design builds with no problems on EDK9.2 so I may fall back to it but I am going to continue progress on my Custom EDK10.1 as well. Do you have EDK9.2 available it may be quicker. Hubert Hubert Bahr wrote: Have you tried the pre-built for the board. I find it works. I am now working with A BSB generated design but in order to get it down to a size that fits this board I had to go into the memory controller and change the fifo settings to use logic instead of bram. I also changed all the addresses to match those of the reference design I did that by cutting and pasting between the mhs files of the respective designs. I installed the pre-built and then used the newly generated FS-boot. In this case it got past booting stage and reported the first few lines of the U-boot stage. It looks like I now need to go into U-boot to find out what it is looking for. I stopped at that point to check out other Xilinx environments I have all available from 8.1 on but they take different levels of os or are 32 bit instead of 64. I also have an XUP board and it has different levels of support in various editions. For full functionality my workstation needs a 64 bit release 5 os. So that Is what I prefer and thus Release 10.1 but I do not like the Design that 10.1 generates. Hubert Monthadar Al-Jaberi wrote: Hi! Indeed I am using Spartan 3E 500 RevD Starter board from digilent on EDK 10.1. and am stuck :S br, On Mon, Oct 13, 2008 at 6:43 PM, Hubert Bahr <hab@xxxxxxxxx> wrote: Hi, What board and device are you using. I am also having some similar problems with 10.1, See the stream on FS-Boot, EDK 10.1 Spartan 500ERevD for my experiences. I am trying various approaches and getting different results. Right now I am setting up various versions of Xilinx tools to see how the results compare. I will report my findings. Hubert Monthadar Al-Jaberi wrote: Hi! I created a new project with EDK 10.1. The new project uses PLB. and I created a new software platform that contains the FS-BOOT code. Followed the tutorial http://developer.petalogix.com/wiki/BoardGuides/Custom/Tutorial as much as I code (they are using OBP). And when I download the bitstream I get the welcome message and waiting for an srec: ================================================= FS-BOOT First Stage Bootloader (c) 2006 PetaLogix ================================================= FS-BOOT: System initialisation completed. FS-BOOT: No existing image in FLASH. Starting image download. FS-BOOT: Waiting for SREC image.... \ The wheel just spins for 1 second and then stops, and when I open XMD from edk and type state I get this: --------------------------------------------------------------------------------------- System(0) - Hardware System on FPGA(Device 1) Targets: --------------------------------------------------------------------------------------- Blocked on Mem Instr ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ |