Re: [microblaze-uclinux] Problems compiling U-boot

["Juan Pablo Gómez " <juanwalker@xxxxxxxxx>]

mmm, it seems that here are the active link for download the BSP file

http://www.monstr.eu/wiki/doku.php?id=bsp:bsp

2008/10/14 Juan Pablo Gómez <juanwalker@xxxxxxxxx>

Hi Nathan!. I'm  not including the SYSTEMACE driver on the linux configuration but the error is appearing again.

What propierties do you disable in the configuration? I've to delete the IP core from my EDK project?

Also, I want to know what happend with the new U-BOOT. I download the sources of the new U-BOOT but I was not able to
download the latest version of u-boot BSP, can you send me  a copy please?

Thank you for all the help and all the collaboration in the list

2008/10/14 Nathan Hillery <nhillery1@xxxxxxxxx>

Hola Juan,

I think you're on the same path as me.  I had this error when I tried
to treat the SystemACE Compact Flash as flash.  But the SystemACE
presents a disk-like block device (i.e. perfect to hold a filesystem,
but not just an array of memory locations).

I think your error will go away when you change your configuration to
eliminate the flash.  We'll need to use the configuration capabilities
of the SystemACE to configure our FPGAs, load our program into RAM,
then jump to the start address.

Cheers,
Nathan.

On Tue, Oct 14, 2008 at 1:34 PM, Juan Pablo Gómez <juanwalker@xxxxxxxxx> wrote:
> Greetings community,
>
> When I build petalinux this error appears :
>
>
> make ARCH=microblaze -C vendors romfs.post
> make[1]: se ingresa al directorio
> `/home/juanwalker/petalinux_lite/software/petalinux-dist/vendors'
> make -C
> /home/juanwalker/petalinux_lite/software/petalinux-dist/vendors/Xilinx/virtex2p/.
> dir_v=/home/juanwalker/petalinux_lite/software/petalinux-dist/vendors/Xilinx/virtex2p/.
> -f
> /home/juanwalker/petalinux_lite/software/petalinux-dist/vendors/vendors-common.mak
> romfs.post
> make[2]: se ingresa al directorio
> `/home/juanwalker/petalinux_lite/software/petalinux-dist/vendors/Xilinx/virtex2p'
> make[2]: No se hace nada para `romfs.post'.
> make[2]: se sale del directorio
> `/home/juanwalker/petalinux_lite/software/petalinux-dist/vendors/Xilinx/virtex2p'
> make[1]: se sale del directorio
> `/home/juanwalker/petalinux_lite/software/petalinux-dist/vendors'
> find /home/juanwalker/petalinux_lite/software/petalinux-dist/romfs/. -name
> CVS | xargs -r rm -rf
> u-boot/petalinux-uboot-config
> u-boot/petalinux-uboot-config: line 177: + : syntax error: operand expected
> (error token is " ")
> make: *** [u-boot-config] Error 1
>
> [juanwalker@localhost petalinux-dist]$
>
>
> I search in the mail list archives and I found that someone had this same
> error and he could solve the problem.
> He said that the problem was in the system flash :
>
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/08/msg00003.html
>
> So he add a nand memory as system flash,
>
> But he wasn't used a flash memory, and I'm using a system ace flash.
> Anyone has this similar error??? Or maybe anyone knows why it's ocurring??
>
>
> Thank you, I appreciate all the help
>
> Regards, Juan
>

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

--
Muchas gracias.

Atentamente, Juan Pablo Gómez

--
Muchas gracias.

Atentamente, Juan Pablo Gómez