RE: [microblaze-uclinux] Newbie on an Avnet V5LX50 board

[Rick Hunnicutt <RHunnicutt@xxxxxxxxxxx>]

Thank you John.

Under device drivers -> char devices -> serial devices, I only have:

< > 8250/16550 and compatible serial support
--- Non-8250 serial port support
<*> Xilinx uartlite serial port support
 [*]   Support for console on Xilinx uartlite serial port

How do I get the option you speak of?

Thanks much!
Rick Hunnicutt
________________________________________
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx [owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of John Williams [jwilliams@xxxxxxxxxxxxxx]
Sent: Thursday, October 16, 2008 3:32 AM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] Newbie on an Avnet V5LX50 board

Hi Rick,

Rick Hunnicutt wrote:
> Hello all:
>
> I'm a newbie and I'm trying to bring up the aforementioned board. I've disabled Ethernet and flash, just using XDM to load the image.bin to the SDRAM location. It loads and starts to boot but stops with no clues as to why, at least not that I can glean. Any help as to my next steps would be appreciated.

[snip]


> uclinux[mtd]: set ROMfs to be root filesystem index=0
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 76k freed

In kernel config, device drivers -> char devices -> serial devices,
ensure that "Console on UARTLITE" is selected.  It looks like the kernel
is booting just fine but ther's just no console output.

Cheers,

John

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/