Re: [microblaze-uclinux] Porting PetaLinux to ML505

[Michal Simek <monstr@xxxxxxxxx>]

Hi Tyler,

the best way is download latest PetaLogix svn head. ML505 is there. You have
there reference design for noMMU and MMU kernel.
If you use 0.30 snapshot you can't compile U-BOOT because in this version is not
ll_temac u-boot driver.

Look at this site
http://developer.petalogix.com/wiki/SubVersionAccess

Regards,
Michal

> Hi Nathan,
> Thanks for the quick intro. The bring-up exercise has been very exciting.
> 
> My enviroment is Suse 10.0 SP1 32-bit along with ISE/EDK 10.1 SP3, no IP update, and USB Platform Cable II.
> I started with BSB targetting ML505 and followed through with default settings, nothing fancy. I noticed that with 10.1.03, there's only one option for the EMAC and that is the hard XPS_LL_TEMAC.
> If anybody used 9.1 or anything older than 10.1.03, do you get anything else besides the XPS_LL_TEMAC?
> 
> I then moved on to updating my MSS and XMP files to relate to Petalinux and add the FS-BOOT application. No problem generating the bitfile incorporating FS-BOOT into BRAM. After downloading this bitfile, I did see the FS-BOOT output on kermit console.
> Hard stuff looked good, now comes the soft stuff, linux image and u-boot.
> I created a new platform with "petalinux-new-platform" and ran "petalinux-copy-autoconfig" from the hardware project. Ran "make menuconfig" to update the default kernel setting, left "build u-boot" unchecked as I'm sure I'll run into issues and just want to make sure I can build separately for now.
> 
> Ran "make all" and saw the first error regarding the Xilinx EMAC in drivers/net. It makes sense because XPS_LL_TEMAC is used instead and I haven't yet digged into drivers and build config scripts yet. I modified Kconfig to turn off building the Xilinx EMAC just to verify the build process. It then finishes building but the image probably won't work ;)
> 
> Next I had u-boot built and saw a build error. It complained about "net.c" having undefined routines that I see exist in drivers directory. I now have a bit of digging to do for it to make sense.
> 
> Thanks 
> Tyler
> 
> ----- Original Message -----
> From: "Nathan Hillery" <nhillery1@xxxxxxxxx>
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Sent: Tuesday, November 11, 2008 9:12:30 PM GMT -08:00 US/Canada Pacific
> Subject: Re: [microblaze-uclinux] Porting PetaLinux to ML505
> 
> Tyler,
> 
> Welcome to the list. We're all new at something;-)
> 
> It can be done. I found best success by following the "Petalinux from
> scratch" document. Try that, then post if/when you have questions.
> 
> Cheers,
> Nathan.
> 
> On 11/11/08, Tyler Q. Nguyen <tyler@xxxxxxxxxxxxx> wrote:
>> Hi,
>> I'm new to this list. I'm trying to port PetaLinux to the ML505 board
>> with 10.1 Xilinx tool SP3 and was wondering if anybody else had
>> pioneered a similar set up before.
>>
>> Thanks
>> Tyler
>>
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@xxxxxxxxxxxxxx
>> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive :
>> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/