[microblaze-uclinux] Not all UARTLITE shows up in /proc/interrupts

["Olof Backing" <olof.backing@xxxxxxxxxxxx>]

Hi!
Consider the following (during boot):

uartlite.0: ttyS0 at MMIO 0x40640000 (irq = 3) is a uartlite
uartlite.1: ttyS1 at MMIO 0x40600000 (irq = 1) is a uartlite
uartlite.2: ttyS2 at MMIO 0x40620000 (irq = 2) is a uartlite

and then the following:

# cat /proc/interrupts
           CPU0
  0:       2121     level OPB-INTC  timer
  3:         73      edge OPB-INTC  uartlite

Shouldn't I be able to see all three (3) uartlite's in the printout? It not - why?
Because I can see all 22 of them on an Altera Nios2 system with uClinux.

Regards,
Olof
-- 
Olof Backing
CAG Contactor AB                              Office: +46 (0)8 752 81 00
Finlandsgatan 14                             Mobile: +46 (0)70 995 98 99
SE-164 74  KISTA                                 Fax: +46 (0)8 752 05 30

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/