|
Hi, I am try to boot petalinux on spartum 3a.But nothing is seen
on terminal. Currently I am using XPS 10.1.In this OPB is replace with
PLB. Following Steps follows. 1.Take spartum 3E-500 REVC linux kernel code. 2.Generate Kconfig for Spartum 3A board. 3.Copy this Kconfig in spartum 3E-500 REVC code. 4.Build Kernel. 5.Boot FS boot from RAM. 6.Copy kernel image(image.bin) in ram start address by using
dow command. 7.Con at start address. After this noting is seen on the terminal. Thanks |