[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] new platform compile and MPMC supported



Hi Finn and John,

> Hi Finn,
> 
> 
> 
> 
>     Thanks John for the update of how things are going with petalogix
>     and linux for microblaze. Guess you'll be working remote with Michal
>     (or did he move down under.. ?). He did a good job of making a
>     generic platform for microblaze systems on u-boot (this should go
>     into the Petalogix distrib).
> 
> 
> Michal is working remotely, although I think he wouldn't mind the moev
> to Australia maybe in future :)

Interesting discuss about me. :-) I look for any Caribbean Islands with
electricity and internet access. :-)

Cheers,
Michal

> 
>     I had to remove all signs of the MPMC and define ERAM parameters
>     manually to get things going.
> 
> 
> This is fixed in the SVN trunk (and will be in snapshot release coming
> very soon).
>  
> 
> 
>     And yes I apparently didn't have the uartsimple driver enabled in
>     linux. I used a script to create a new vendor platform and the
>     kernel config was apparently a bit "skinny". So I took the Xilinx
>     Spartan-3E1600 board config as a starting point instead. Now things
>     are compiling. Last build obstacle is regarding cramfs:
> 
>     "
>     /home/fn/projects/mpl3e/linux/petalinux-v0.30-rc1/software/petalinux-dist/user/cramfs/mkcramfs.c:38:18:
>     error: zlib.h: No such file or directory
>     /home/fn/projects/mpl3e/linux/petalinux-v0.30-rc1/software/petalinux-dist/user/cramfs/mkcramfs.c:
>     In function ācramsortā:
>     /home/fn/projects/mpl3e/linux/petalinux-v0.30-rc1/software/petalinux-dist/user/cramfs/mkcramfs.c:157:
>     warning: assignment discards qualifiers from pointer target type
>     /home/fn/projects/mpl3e/linux/petalinux-v0.30-rc1/software/petalinux-dist/user/cramfs/mkcramfs.c:158:
>     warning: assignment discards qualifiers from pointer target type
>     /
>     "
> 
> 
> You need the package zlib-devel installed on your workstation - in
> CentOS / RHEL, do "sudo yum install zlib-devel".  On Debian and friends
> it's probably "apt-get install zlib-devel" or similar
> 
> Regards,
> 
> John
> -- 
> John Williams, PhD, B.Eng, B.IT <http://B.IT>
> PetaLogix - Linux Solutions for a Reconfigurable World
> w: www.petalogix.com <http://www.petalogix.com>  p: +61-7-30090663  f:
> +61-7-30090663
> 

-- 
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/