[microblaze-uclinux] ftpd bug?

[raul.camaras@xxxxxxxxxxxx]

Hello,

Does anybody know about a bug in ftpd?

When I add a gateway to routing table,
ftp does not work any more.

Best regards,
Raul


AREVA Energietechnik GmbH
Vorsitzender des Aufsichtsrates: Dr. rer. nat. Peter Kirchesch - Geschäftsführung:
Dipl. Kfm. Joachim Gessner, Dr. Ing. Wolfgang Voß
Sitz: Frankfurt am Main - Amtsgericht: Frankfurt am Main, HRB 40819 - USt.-ID-Nr.
DE 811982897

"Torrego Raul" <RTorrego@xxxxxxxxxx>
Gesendet von: owner-microblaze-uclinux@xxxxxxxxxxxxxx

02.04.2009 11:01

Bitte antworten an
microblaze-uclinux@xxxxxxxxxxxxxx

An	<microblaze-uclinux@xxxxxxxxxxxxxx>
Kopie
Thema	RE: [microblaze-uclinux] [microblaze-uclinux] U-boot can't download "image.ub"

Hi Thierry,
 
Your communication seems
to be “ok”, I mean, when the symbol   #   is written, it means
that some data has been transferred. On the other hand the symbol  T
 stands for timeout.
 
The problem is that you reach
10 timeouts and that is the limit, so the transfer re-starts. I got this
problem when working on a busy network and solved it using a local network
only with my computer and the FPGA board on it. You could also try increasing
the timeout count limit, but I don’t know where it can be modified.
 
Regards.
 
Raúl
 
 
 
De: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] En nombre de Thierry
BESSIERE
Enviado el: jueves, 02 de abril de 2009 9:47
Para: microblaze-uclinux@xxxxxxxxxxxxxx
Asunto: [microblaze-uclinux] [microblaze-uclinux] U-boot can’t download
“image.ub”
 
Hi,
 
 
I would like download “image.ub”
with a TFTP server but u-boot can’t download this file. Here is what I
have in the hyper terminal:
 
_______________________________________________________
Load address: 0x8c000100
Loading: #################################################################
         ##########T
#T ###########T T T T T T T T
Retry count exceeded; starting
again
TFTP from server 192.168.0.71;
our IP address is 192.168.0.10
Filename 'image.ub'.
Load address: 0x8c000100
Loading: #########################T
#############T T T T #######################
####
         ############T
T T T T ###
Retry count exceeded; starting
again
TFTP from server 192.168.0.71;
our IP address is 192.168.0.10
Filename 'image.ub'.
Load address: 0x8c000100
Loading: ############################T
T T T T T T T T T
Retry count exceeded; starting
again
TFTP from server 192.168.0.71;
our IP address is 192.168.0.10
Filename 'image.ub'.
Load address: 0x8c000100
Loading: T #T ####T T T T ######################################################
######
         #############################T
T T T
Retry count exceeded; starting
again
_______________________________________________________
 
I use these command lines before
starting the download:
_______________________________________________________
setenv serverip 192.168.0.71
setenv ipaddr 192.168.0.10
setenv bootfile image.ub
________________________________________________________
 
My questions ar the next :
 
1] Should I validate an option
in menuconfig for the TFTP protocol? 
 
2] On EDK, I must modify the parameters
of EMAC?
 
3] PetaLinux is very slow on the
FPGA, The lost packets can be the consequence of this?
 
Best regards.
Thierry


:._______________
VERTRAULICHKEIT: Dieses e-mail und alle angehängten Dateien sind vertraulich
und privilegiert. Sollten Sie nicht als namentlicher Empfänger aufgeführt
sein, informieren Sie unverzüglich den Absender und machen Sie den Inhalt
nicht für Dritte zugänglich, noch darf dieser gedruckt oder für andere
Zwecke verwendet, kopiert oder auf irgend einem Medium gespeichert werden.