I have Rev C.
By the way on the Digilent website, they have a download of a project and uclinux system-ace file that you can use if you want to run uclinux on the XUPV2P. Obviously you can’t do much development with that since it is just a binary, but it’s nice for demonstration/evaluation purposes. Here is the link:
just scroll down and download the “uclinux-xupv2p_rev_1_1.zip” file.
Thanks David for your reply. I
am about to start porting it too so it's good to share the experience with
anyone doing the same thing. I do have the SDRAM as a 256 MB DIMM on the board.
What is your XUPV2P board revision?
On Tue, Apr 28, 2009 at 9:25 PM, David Babich <dbabich@xxxxxxxxxxxxxxxx> wrote:
I actually just started working on a port for the Digilent XUPV2P board yesterday. I'm doing it in my spare time, so my progress may be slow. If I run into any issues I'll post as I go along. Based on passed experience with Petalinux, it is certainly feasible and the XUPV2P is more than sufficient to support it provided you include the XUPV2P's SDRAM module in your design.
From: Aws Ismail (SFU) [mailto:aii@xxxxxx]