Re: [microblaze-uclinux] error UART not defined (redux)

[Michal Simek <michal.simek@xxxxxxxxxxxxx>]

Hi Dan,

Dan Miller wrote:
> Okay, I had the same issue, and solved it by disabling u-boot as per the
> recent discussion.  From there, the current SubVersion distribution
> built successfully (though I don't yet know if it will actually boot and
> run).
> 
> So, my question is, what will be present in the 0.40 distribution when
> it is distributed??  Will the UART test be removed from u-boot?  Or
> should we just consider u-boot no longer supported in the MicroBlaze
> distribution?

I understand that you had some problems with uarts but if we want to use uartlite
or uart16550 we had to do changes in BSP. U-BOOT configuration in 0.40 is totally rework.
The only one problem is that you used old designs. We expect that people will use
latest EDK and latest designs.
OK, back to your question.
UART test is there and you should just recompile lib with latest BSP + copy Kconfig.auto to proper
location that's all.
I expect that U-BOOT will be still in distribution and John don't remove it. I'll be against it. :-)
BTW: If you don't like U-BOOT, you can disable it. It is your choice.

Regards,
Michal



> 
> Dan Miller
> 
> ___________________________ microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive
> : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

-- 
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/