Re: [microblaze-uclinux] First *real* PetaLinux build attempt

[Dan Miller <dan@xxxxxxxxxx>]

John Williams wrote:

Hi Dan,

On Wed, Jun 3, 2009 at 6:26 AM, Dan Miller <dan@xxxxxxxxxx> wrote:
  

Okay, we finally got our project completely built, using Xilinx 11.1.  I'm
using the mixed-build process, where we build on Windows XP, I map the
target drive onto my Ubuntu 9.04 machine (which worked), and am now trying
to build PetaLinux 0.40-rc3.

First I ran:
root@damien:/home/petalinux-v0.40-rc3/software/petalinux-dist#
petalinux-new-platform -v Krommos -p ip3new -k 2.6 -m
New platform for Krommos ip3new successfully created
 Please use petalinux-copy-autoconfig tools with the same parameters (-v,
-p)

Then I attempt copy autoconfig, but it fails:
root@damien:/home/petalinux-v0.40-rc3/software/petalinux-dist#
petalinux-copy-autoconfig -v Kromos -p ip3new -k 2.6
/media/petalinux/system.xmp
ERROR: Only single-cpu PetaLinux OS type supported.

I've never seen this message before, has anyone else??  I can't imagine that
that we've built multiple cpus into our project!!  What does this mean?
    

What option do you have for "PARAMETER OS_NAME="?  It should be "petalinux".

We used to get this error if you had an old but commented out "OS"
fragment in your MSS file.  But, for quite some time now, the script
disregards comment blocks in MSS.

Just post your MSS file and we'll have a look.

Regards,

John
  

Okay, it looks  "PARAMETER OS_NAME = standalone"
Let's see how attachments work in this mailing list...

Dan

 PARAMETER VERSION = 2.2.0


BEGIN OS
 PARAMETER OS_NAME = standalone
 PARAMETER OS_VER = 2.00.a
 PARAMETER PROC_INSTANCE = microblaze_0
 PARAMETER STDIN = RS232_Uart_1
 PARAMETER STDOUT = RS232_Uart_1
END


BEGIN PROCESSOR
 PARAMETER DRIVER_NAME = cpu
 PARAMETER DRIVER_VER = 1.11.c
 PARAMETER HW_INSTANCE = microblaze_0
 PARAMETER COMPILER = mb-gcc
 PARAMETER ARCHIVER = mb-ar
 PARAMETER CORE_CLOCK_FREQ_HZ = 125000000
END


BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = dlmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = ilmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = lmb_bram
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.14.a
 PARAMETER HW_INSTANCE = RS232_Uart_1
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = gpio
 PARAMETER DRIVER_VER = 2.13.a
 PARAMETER HW_INSTANCE = LEDs_8Bit
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = gpio
 PARAMETER DRIVER_VER = 2.13.a
 PARAMETER HW_INSTANCE = Push_Buttons_5Bit
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = lltemac
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = Hard_Ethernet_MAC
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = mpmc
 PARAMETER DRIVER_VER = 3.00.a
 PARAMETER HW_INSTANCE = DDR2_SDRAM
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = xps_bram_if_cntlr_1
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = xps_bram_if_cntlr_1_bram
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = tmrctr
 PARAMETER DRIVER_VER = 1.11.a
 PARAMETER HW_INSTANCE = xps_timer_1
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = clock_generator_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.14.a
 PARAMETER HW_INSTANCE = debug_module
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = proc_sys_reset_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = intc
 PARAMETER DRIVER_VER = 1.11.a
 PARAMETER HW_INSTANCE = xps_intc_0
END