[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
From: Nicolas Herve <nicolas.herve@xxxxxxxxx>
Date: Mon, 8 Jun 2009 12:49:27 -0300
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type :content-transfer-encoding; bh=5yb0Oah6PXX2UdL2qxWEHXAXwyGFlSbLecbSzIy23VI=; b=o2wSyjBS+wgHBUvsO/nXuWlCCzjVQl7wpgGUQvwhjGbJI0w+iZIkiUDWddkfeeWqgZ qbVrMgaZzhc9as7zg4hMLdT7czoPwK33OGQdQGj5uLTfbt0lxkjLNLdZU8SZrJQTOL5q LDGBIJ2SWap/SwepsXtn1qDuF65R7L9wZzNm0=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type:content-transfer-encoding; b=ppctJYcR1NTld1neO4G/pETKjEO09kPQpxRhBocJ3XgOBYLZu6QjZJ6rq9Frg+SYyN OZzv9CBdbmu5U/k3mLpN4VgJ1mlSFJAO1AXuGLnlX3pp/3eryBtIHl7hcH+F1w6xiN0i DUkhjONBWDrPqY9qqHVMlhqUBY9BslG3nQ1MI=
In-reply-to: <4A298743.3000209@xxxxxxxxx>
References: <9916875c0906040808j62d29284qb6e9b09fb2e933f9@xxxxxxxxxxxxxx> <3778d65e0906041329n3cc3ad0dw45fffc92aaf66adf@xxxxxxxxxxxxxx> <9916875c0906050455i32b74304td624c9a083f2c621@xxxxxxxxxxxxxx> <3778d65e0906050908m233856c7j2bba1ab77994e547@xxxxxxxxxxxxxx> <4A29537D.8040400@xxxxxxxxx> <3778d65e0906051159k37a80f75pdc1610af6caa853a@xxxxxxxxxxxxxx> <3778d65e0906051207q2c6f346bv4578274896b863bf@xxxxxxxxxxxxxx> <3778d65e0906051232m63ce467fk9ca322907b0bbd6@xxxxxxxxxxxxxx> <4A298743.3000209@xxxxxxxxx>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxxxxxxxx

Did you apply the service pack 3 ?
It may prevents other problems.

2009/6/5 Aleksandar SUTIC <asutic@xxxxxxxxx>:
>        Thanks a lot, Nicolas. I'll check everything again and post my
> findings here. I really hope that everything will start to work. It would be
> a truly nice start of the week :-).
>
>        I'm using EDK 10.1 and, if I recall correctly, the frequency is
> 100MHz.

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Aleksandar Sutic

References:
- [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Aleksandar Sutic
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Nicolas Herve
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Aleksandar Sutic
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Nicolas Herve
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Aleksandar SUTIC
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Nicolas Herve
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Nicolas Herve
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Nicolas Herve
- Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
  - From: Aleksandar SUTIC

Prev by Date: Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
Next by Date: Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
Previous by thread: Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
Next by thread: Re: [microblaze-uclinux] u-boot error 'end address not on sector boundary' on ml403
Index(es):
- Date
- Thread