Re: [microblaze-uclinux] no login prompt after uclinux boot

[John Williams <john.williams@xxxxxxxxxxxxx>]

Hi Aleks,

On Sat, Jun 13, 2009 at 2:53 AM, Aleksandar Sutic<asutic@xxxxxxxxx> wrote:

> While experimenting with petalinux-v0.40-rc3, I encountered a weird issue. I
> prepared uClinux images for ML403 board (linux 2.4.x). After the images were
> downloaded to the board, boot process seems to be executing properly (see
> http://developer.petalogix.com/wiki/UserGuide/AdvancedTopics/Using16550Uart
> and compare it with my log shown bellow), but I don't get any login prompt.
> Login is supposed to be enabled in 'make menuconfig'.
>
> Does anybody have ideas what have I missed here?

Can you check the file romfs/etc/inittab?  It should refer to
/dev/ttyS0 (not /dev/ttyUL0), and the baud rate etc should be correc.t

This should be generated automatically and correctly when you do make romfs.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/