I haven't tested it but I don't expect any big troubles. If you can please
try it and let me know.
Thanks,
Michal
I haven't tested it but I don't expect any big troubles. If you can please
Aws Ismail wrote:
> Hi Pablo,
>
> I was sifting through the /drivers/input/ list on the git repository and
> I have found the driver for the xps_ps2 IP core. This can be found here:
>
> http://git.monstr.eu/git/gitweb.cgi?p=linux-2.6-microblaze.git;a=history;f=drivers/input/serio/xilinx_ps2.c;h=ebb22f88c8426bdd3cebff9e2f822d0b7412ade7;hb=HEAD
>
> Its been added by John Linn from Xilinx on July of 2008. As part of my
> project of migrating Petalinux to the XUPV2P board, I want to eventually
> use a PS/2 keyboard attached to the PS/2 port of the board. My EDK
> project is microblaze-based and uses the XPS_PS2 core. However, looking
> at the Kconfig entry of the XPS_PS2 driver, john linn mentions that its
> for PPC, I am new to all of this so do you know if it will work with a
> microblaze-based design instead?
try it and let me know.
Thanks,
Michal
>
> By the way, I also checked the SVN trunk for Petalinux here (username:
> guest, no password):
>
> https://developer.petalogix.com/pr/internal/petalinux/trunk/software/linux-2.6.x-petalogix/drivers/input/serio/
>
> and the driver does not exist.
>
> If anyone has tried using this driver, would you please let me know if
> it works with a microblaze-based EDK project.
>
> Best Regards.
>
> Aws\
>
> On Fri, Apr 3, 2009 at 2:41 AM, <pcolodron@xxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>> <mailto:pcolodron@xxxxxxxx>> wrote:
>
> Hi all,
>
> I am actually working with a ML405 board and microblaze. I have
> succesfully ported a uClinux system with framebuffer support. My
> next aim is to work with a PS/2 mouse and a PS/2 keyboard.
>
> I guessed I had to activate 'Device Drivers'->'Input device
> support'->'Mouse interface' and 'Provide legacy /dev/psaux'.
>
> I also activated 'Device Drivers'->'Input device
> support'->'Mouse'->'PS/2 Mouse' and also 'AT Keyboard'.
>
> However, if I do this I do not have any /dev/psaux in my system and
> neither I have /dev/input. Is this normal?
>
> 'i8042 PC keyboard controller' is activated as well but I believe
> that, in my case, I need a specific Xilinx PS/2 driver, am I right?
>
> I have been looking at ../drivers/input files and, if I am not
> mistaken, mousedev.c should register the devices /dev/psaux and
> dev/mice. When the kernel boots, I receive 'mice: PS/2 mouse device
> common for all mice'.
>
> Could anyone help to understand the connection beeween these drivers
> and devices? Do you know any place where I could find a driver for
> Xilinx PS/2?
>
> Thanks a lot for your help.
>
> Kind regards,
>
> Pablo Colodron
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>
>
>
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/