Re: [microblaze-uclinux] Petalinux loadable module support kernel 2.6.20 problems

[John Williams <john.williams@xxxxxxxxxxxxx>]

Hi Jurgen,

On Wed, Jul 8, 2009 at 9:40 PM, Mueller,
Juergen<Juergen.A.Mueller@xxxxxxxxxxxxxxx> wrote:

> I updated to the rc4 Version but the error is still the same. I added the
> config file to this e-mail.
>
> Is the following execution correct:
>
> in the pentalinux-dist directory:
> make menuconfig (settings)
> make
>
> in the user-module/my_module directory:
> make
> make romfs
> make image

Yes, that's the right sequence.

I just tried it here and it worked fine, so there would seem to be
something with your local settings.  Are you using exactly the simple
templat eproduced by petalinux-new-moduloe?  Or have you made some
changes to it?

A quick look at your configs look OK, but you might like to do a diff
between the following files, make sure you haven't changed anything
critical. OF course there will be some differences because you have a
custom platform, but you can filter them out.

kernel config:
petalinux-dist/linux-2.6.x/.config vs
vendors/Xilinx/Xilinx-S3DSP1800A-Rev1-edk101/config.linux-2.6.x

userland config (esp. busybox, insmod etc)
petalinux-dist/config/.config vs
vendors/Xilinx/Xilinx-S3DSP1800A-Rev1-edk101/config.vendor

Regards,

John
-- 
John Williams, PhD, B.Eng, B.IT
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com  p: +61-7-30090663  f: +61-7-30090663

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/