[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure
From: John Williams <john.williams@xxxxxxxxxxxxx>
Date: Sat, 18 Jul 2009 10:02:54 +1000
In-reply-to: <1319871685.3141247850470693.JavaMail.root@xxxxxxxxxxxxxxxx>
References: <1319871685.3141247850470693.JavaMail.root@xxxxxxxxxxxxxxxx>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxxxxxxxx

Hi,

[snip]

> I cannot use the DTE RS-232 port so I created a new EDK project with same features as the reference design one except that I am selecting the RS232 DCE uartlite port.

> arch/microblaze/platform/common/xuartlite.c:40: error: `CONFIG_XILINX_UARTLITE_0_IRQ' undeclared here (not in a function)

It looks like you have not connected the IRQ of the DCE UARTLITE, to
the INTC.  There's a little check box in BSB that says "Use interrupt"
- make sure it's checked for this device.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure
  - From: Faiza Ait-Kaci

References:
- [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure
  - From: Faiza Ait-Kaci

Prev by Date: [microblaze-uclinux] Re: [PATCH 2/2] linker script: unify usage of discard definition
Next by Date: [microblaze-uclinux] (no subject)
Previous by thread: [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure
Next by thread: Re: [microblaze-uclinux] { yes "" | make oldconfig dep all } command failure
Index(es):
- Date
- Thread