[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[microblaze-uclinux] stuck at the uclinux prompt
Hi,
I've just compiled a petalinux version for my XUP V2 Pro card following
andy's tutorial (thanks Andy)
http://www.labbookpages.co.uk/fpgas/linux/xupv2proMBLinux.html, the
thing doesn't work until I activated data and instruction cache on µblaze.
Now everything seems working, I do have Linux booting until the printing
of the uclinux login prompt, and their I get stuck, I couldn't enter any
data !! I have tried several different terminals (minicom, cutecom,
Kermit) but still the problem is the same.
Here the boot log.
Thank's for help
Jalil.B
Found romfs @ 0x901e108c (0x000f7000)
#### klimit 901f9000 ####
Moving 0x000f7000 bytes from 0x901e108c to 0x901f8b10
New klimit: 0x902f0000
Linux version 2.6.20-uc0 (jboukh@Jalil) (gcc version 3.4.1 ( PetaLinux 0.20 Build -rc1 0509
setup_cpuinfo: initialising
setup_cpuinfo: No PVR support in CPU. Using static compile-time info
set_cpuinfo_static: Using static CPU info.
setup_memory: max_mapnr: 0x9ffff
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0x10000
On node 0 totalpages: 65536
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 65024
Kernel command line:
OPB INTC #0 at 0x81800000
PID hash table entries: 1024 (order: 10, 4096 bytes)
TIMER at 0x83C00000
disabling early console
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256640k/262144k available
Calibrating delay loop... 49.76 BogoMIPS (lpj=248832)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
uartlite.0: ttyUL0 at MMIO 0x84000000 (irq = 2) is a uartlite
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: using fifo mode.
eth0: No PHY detected. Assuming a PHY at address 0.
eth0: Xilinx EMACLite #0 at 0x81000000 mapped to 0x81000000, irq=1
uclinux[mtd]: RAM probe address=0x901f8b10 size=0xf7000
Creating 1 MTD partitions on "RAM":
0x00000000-0x000f7000 : "ROMfs"
uclinux[mtd]: set ROMfs to be root filesystem index=0
i8042.c: i8042 controller self test timeout.
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 84k freed
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting /etc/config:
Populating /etc/config:
flatfsd: Nonexistent or bad flatfs (-48), creating new one...
flatfsd: Failed to write flatfs (-48): No such device
flatfsd: Created 5 configuration files (185 bytes)
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Setting up interface eth0:
Starting portmap:
Starting thttpd:
uclinux login: