[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Re: BUG: scheduling while atomic

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
From: Michal Simek <michal.simek@xxxxxxxxxxxxx>
Date: Tue, 11 Aug 2009 10:54:59 +0200
In-reply-to: <7b24affd0908110042x7902e0a5n9faec62d4eb71e9d@xxxxxxxxxxxxxx>
References: <7b24affd0908010155y9a6a90ep30b79b4ef2c40dc7@xxxxxxxxxxxxxx> <7b24affd0908020140v66cc227drf7f0ec54321438ec@xxxxxxxxxxxxxx> <4A756D20.4020704@xxxxxxxxxxxxx> <7b24affd0908110042x7902e0a5n9faec62d4eb71e9d@xxxxxxxxxxxxxx>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxxxxxxxx
User-agent: Thunderbird 2.0.0.18 (X11/20081120)
Hi Victor,

> 
> Hi,
> 
> I have replaced MicroBlaze 7.20.b with 7.10.d as you have suggested
> and made sure the required ports are connected (resets, clock,
> interrupts, etc). Compiled the system built kernel without errors, but
> getting the same "BUG: scheduling while atomic error".

Your testing platform is ml505 right?
If yes, can you pack your design with microblaze_0 folder (I haven't started to use EDK11.1 yet)
and standard files as are in reference design + bitstream?
If I have a time, I'll look to your issue.

Regards,
Michal


> 
> Boot log and petalinux-send-config output are attached below.
> 
> As a reminder, I am using EDK 11.1 with petalinux-v0.40-rc4,
> CONFIG_PREEMPT enabled, caches enabled. The design has been created
> using wizard with only a few peripherals: DDR2, intc, timer, 2 uarts,
> and other basic modules like reset, clock, and bus interfaces.
> 
> I also found that Configure standard kernel features (for small
> systems) ---> BUG() support is not enabled. However, I see BUG()
> messages. Does it make sense?
> 
> Booting log:
>  @ 0x501d108c (0x000ef000)
> #### klimit 501e9000 ####
> Moving 0x000ef000 bytes from 0x501d108c to 0x501e885c
> New klimit: 0x502d8000
> Linux version 2.6.20-uc0 (victor@bit-cruncher) (gcc version 3.4.1 (
> PetaLinux 0.20 Build -rc1 050607 )) #10 PREEMPT Mon Aug 10 23:37:35
> EST 2009
> setup_cpuinfo: initialising
> setup_cpuinfo: No PVR support in CPU.  Using static compile-time info
> set_cpuinfo_static: Using static CPU info.
> setup_memory: max_mapnr: 0x5ffff
> setup_memory: min_low_pfn: 0x50000
> setup_memory: max_low_pfn: 0x10000
> On node 0 totalpages: 65536
>   DMA zone: 512 pages used for memmap
>   DMA zone: 0 pages reserved
>   DMA zone: 65024 pages, LIFO batch:15
>   Normal zone: 0 pages used for memmap
> Built 1 zonelists.  Total pages: 65024
> Kernel command line:
> OPB INTC #0 at 0x60000000
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> TIMER at 0x80000000
> disabling early console
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 256768k/262144k available
> Calibrating delay loop... 49.56 BogoMIPS (lpj=247808)
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> uartlite.0: ttyUL0 at MMIO 0x84020000 (irq = 1) is a uartlite
> uartlite.1: ttyUL1 at MMIO 0x84000000 (irq = 0) is a uartlite
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> uclinux[mtd]: RAM probe address=0x501e885c size=0xef000
> Creating 1 MTD partitions on "RAM":
> 0x00000000-0x000ef000 : "ROMfs"
> uclinux[mtd]: set ROMfs to be root filesystem index=0
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 84k freed
> BUG: scheduling while atomic: init/0x505ba480/1
> 
> Stack:
>   5ffc1f0c 00000000 00000000 501b7500 5ffc0000 50004434 50190fa4 5ffe8da0
>   505ba480 00000001 00989680 5ffc1e6c 505a7cf8 0011131a 00000013 00000010
>   505bff21 00000001 00000000 00000000 00000000 00000000 00000000 00000000
> Call Trace: [<50004434>]
> 
> -----------------------
> petalinux-send-autoconfig
> 
> #SYSTEM CONFIGS
> CONFIG_DEFAULTS_XILINX=y
> CONFIG_DEFAULTS_XILINX_XILINX_ML505_TEST_11_1=y
> CONFIG_DEFAULTS_KERNEL_2_6=y
> CONFIG_DEFAULTS_LIBC_NONE=y
> CONFIG_DEFAULTS_KERNEL=y
> CONFIG_VENDOR=Xilinx
> CONFIG_PRODUCT=Xilinx-ML505-test_11.1
> CONFIG_LINUXDIR=linux-2.6.x
> CONFIG_LIBCDIR=
> 
> 
> #KERNEL CONFIGS
> CONFIG_MICROBLAZE=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_UID16=y
> CONFIG_DEFCONFIG_LIST="arch/$ARCH/defconfig"
> CONFIG_EXPERIMENTAL=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_EMBEDDED=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_PRINTK=y
> CONFIG_ELF_CORE=y
> CONFIG_SLAB=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_TINY_SHMEM=y
> CONFIG_BASE_SMALL=1
> CONFIG_BLOCK=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> CONFIG_DEFAULT_CFQ=y
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_PLATFORM_XILINX_XILINX_ML505_TEST_11_1=y
> CONFIG_PROJECT_NAME="Xilinx-ML505-test2_11.1"
> CONFIG_UARTLITE=1
> CONFIG_STDINOUT_BASEADDR=0x84020000
> CONFIG_XILINX_ERAM_START=0x50000000
> CONFIG_XILINX_ERAM_SIZE=0x10000000
> CONFIG_XILINX_LMB_START=0x00000000
> CONFIG_XILINX_LMB_SIZE=0x00010000
> CONFIG_XILINX_CPU_CLOCK_FREQ=100000000
> CONFIG_XILINX_MICROBLAZE0_SCO=0
> CONFIG_XILINX_MICROBLAZE0_DATA_SIZE=32
> CONFIG_XILINX_MICROBLAZE0_DYNAMIC_BUS_SIZING=1
> CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
> CONFIG_XILINX_MICROBLAZE0_INSTANCE="microblaze_0"
> CONFIG_XILINX_MICROBLAZE0_AREA_OPTIMIZED=0
> CONFIG_XILINX_MICROBLAZE0_INTERCONNECT=1
> CONFIG_XILINX_MICROBLAZE0_DPLB_DWIDTH=32
> CONFIG_XILINX_MICROBLAZE0_DPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_MICROBLAZE0_DPLB_BURST_EN=0
> CONFIG_XILINX_MICROBLAZE0_DPLB_P2P=0
> CONFIG_XILINX_MICROBLAZE0_IPLB_DWIDTH=32
> CONFIG_XILINX_MICROBLAZE0_IPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_MICROBLAZE0_IPLB_BURST_EN=0
> CONFIG_XILINX_MICROBLAZE0_IPLB_P2P=0
> CONFIG_XILINX_MICROBLAZE0_D_PLB=1
> CONFIG_XILINX_MICROBLAZE0_D_OPB=0
> CONFIG_XILINX_MICROBLAZE0_D_LMB=1
> CONFIG_XILINX_MICROBLAZE0_I_PLB=1
> CONFIG_XILINX_MICROBLAZE0_I_OPB=0
> CONFIG_XILINX_MICROBLAZE0_I_LMB=1
> CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
> CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
> CONFIG_XILINX_MICROBLAZE0_USE_BARREL=0
> CONFIG_XILINX_MICROBLAZE0_USE_DIV=0
> CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
> CONFIG_XILINX_MICROBLAZE0_USE_FPU=0
> CONFIG_XILINX_MICROBLAZE0_UNALIGNED_EXCEPTIONS=0
> CONFIG_XILINX_MICROBLAZE0_ILL_OPCODE_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_IOPB_BUS_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_DOPB_BUS_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_IPLB_BUS_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_DPLB_BUS_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_DIV_ZERO_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_FPU_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_FSL_EXCEPTION=0
> CONFIG_XILINX_MICROBLAZE0_PVR=0
> CONFIG_XILINX_MICROBLAZE0_PVR_USER1=0x00000000
> CONFIG_XILINX_MICROBLAZE0_PVR_USER2=0x00000000
> CONFIG_XILINX_MICROBLAZE0_DEBUG_ENABLED=0
> CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_PC_BRK=1
> CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_RD_ADDR_BRK=0
> CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_WR_ADDR_BRK=0
> CONFIG_XILINX_MICROBLAZE0_INTERRUPT_IS_EDGE=0
> CONFIG_XILINX_MICROBLAZE0_EDGE_IS_POSITIVE=1
> CONFIG_XILINX_MICROBLAZE0_RESET_MSR=0x00000000
> CONFIG_XILINX_MICROBLAZE0_OPCODE_0X0_ILLEGAL=0
> CONFIG_XILINX_MICROBLAZE0_FSL_LINKS=0
> CONFIG_XILINX_MICROBLAZE0_FSL_DATA_SIZE=32
> CONFIG_XILINX_MICROBLAZE0_USE_EXTENDED_FSL_INSTR=0
> CONFIG_XILINX_MICROBLAZE0_ICACHE_BASEADDR=0x50000000
> CONFIG_XILINX_MICROBLAZE0_ICACHE_HIGHADDR=0x5FFFFFFF
> CONFIG_XILINX_MICROBLAZE0_USE_ICACHE=1
> CONFIG_XILINX_MICROBLAZE0_ALLOW_ICACHE_WR=1
> CONFIG_XILINX_MICROBLAZE0_ADDR_TAG_BITS=13
> CONFIG_XILINX_MICROBLAZE0_CACHE_BYTE_SIZE=32768
> CONFIG_XILINX_MICROBLAZE0_ICACHE_USE_FSL=1
> CONFIG_XILINX_MICROBLAZE0_ICACHE_LINE_LEN=4
> CONFIG_XILINX_MICROBLAZE0_ICACHE_ALWAYS_USED=1
> CONFIG_XILINX_MICROBLAZE0_DCACHE_BASEADDR=0x50000000
> CONFIG_XILINX_MICROBLAZE0_DCACHE_HIGHADDR=0x5FFFFFFF
> CONFIG_XILINX_MICROBLAZE0_USE_DCACHE=1
> CONFIG_XILINX_MICROBLAZE0_ALLOW_DCACHE_WR=1
> CONFIG_XILINX_MICROBLAZE0_DCACHE_ADDR_TAG=13
> CONFIG_XILINX_MICROBLAZE0_DCACHE_BYTE_SIZE=32768
> CONFIG_XILINX_MICROBLAZE0_DCACHE_USE_FSL=1
> CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN=4
> CONFIG_XILINX_MICROBLAZE0_DCACHE_ALWAYS_USED=1
> CONFIG_XILINX_MICROBLAZE0_USE_MMU=0
> CONFIG_XILINX_MICROBLAZE0_MMU_DTLB_SIZE=4
> CONFIG_XILINX_MICROBLAZE0_MMU_ITLB_SIZE=2
> CONFIG_XILINX_MICROBLAZE0_MMU_TLB_ACCESS=3
> CONFIG_XILINX_MICROBLAZE0_MMU_ZONES=16
> CONFIG_XILINX_MICROBLAZE0_USE_INTERRUPT=1
> CONFIG_XILINX_MICROBLAZE0_USE_EXT_BRK=1
> CONFIG_XILINX_MICROBLAZE0_USE_EXT_NM_BRK=1
> CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
> CONFIG_XILINX_UARTLITE_0_FAMILY="virtex5"
> CONFIG_XILINX_UARTLITE_0_SPLB_CLK_FREQ_HZ=125000000
> CONFIG_XILINX_UARTLITE_0_BASEADDR=0x84020000
> CONFIG_XILINX_UARTLITE_0_HIGHADDR=0x8402FFFF
> CONFIG_XILINX_UARTLITE_0_SPLB_AWIDTH=32
> CONFIG_XILINX_UARTLITE_0_SPLB_DWIDTH=32
> CONFIG_XILINX_UARTLITE_0_SPLB_P2P=0
> CONFIG_XILINX_UARTLITE_0_SPLB_MID_WIDTH=1
> CONFIG_XILINX_UARTLITE_0_SPLB_NUM_MASTERS=2
> CONFIG_XILINX_UARTLITE_0_SPLB_SUPPORT_BURSTS=0
> CONFIG_XILINX_UARTLITE_0_SPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_UARTLITE_0_BAUDRATE=115200
> CONFIG_XILINX_UARTLITE_0_DATA_BITS=8
> CONFIG_XILINX_UARTLITE_0_USE_PARITY=0
> CONFIG_XILINX_UARTLITE_0_ODD_PARITY=0
> CONFIG_XILINX_UARTLITE_0_HW_VER="1.01.a"
> CONFIG_XILINX_UARTLITE_0_INSTANCE="RS232_Uart_1"
> CONFIG_XILINX_UARTLITE_0_IRQ=1
> CONFIG_XILINX_UARTLITE_1_FAMILY="virtex5"
> CONFIG_XILINX_UARTLITE_1_SPLB_CLK_FREQ_HZ=125000000
> CONFIG_XILINX_UARTLITE_1_BASEADDR=0x84000000
> CONFIG_XILINX_UARTLITE_1_HIGHADDR=0x8400FFFF
> CONFIG_XILINX_UARTLITE_1_SPLB_AWIDTH=32
> CONFIG_XILINX_UARTLITE_1_SPLB_DWIDTH=32
> CONFIG_XILINX_UARTLITE_1_SPLB_P2P=0
> CONFIG_XILINX_UARTLITE_1_SPLB_MID_WIDTH=1
> CONFIG_XILINX_UARTLITE_1_SPLB_NUM_MASTERS=2
> CONFIG_XILINX_UARTLITE_1_SPLB_SUPPORT_BURSTS=0
> CONFIG_XILINX_UARTLITE_1_SPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_UARTLITE_1_BAUDRATE=115200
> CONFIG_XILINX_UARTLITE_1_DATA_BITS=8
> CONFIG_XILINX_UARTLITE_1_USE_PARITY=0
> CONFIG_XILINX_UARTLITE_1_ODD_PARITY=0
> CONFIG_XILINX_UARTLITE_1_HW_VER="1.01.a"
> CONFIG_XILINX_UARTLITE_1_INSTANCE="RS232_Uart_2"
> CONFIG_XILINX_UARTLITE_1_IRQ=0
> CONFIG_XILINX_MDM_0_FAMILY="virtex5"
> CONFIG_XILINX_MDM_0_JTAG_CHAIN=2
> CONFIG_XILINX_MDM_0_INTERCONNECT=1
> CONFIG_XILINX_MDM_0_BASEADDR=0x84400000
> CONFIG_XILINX_MDM_0_HIGHADDR=0x8440FFFF
> CONFIG_XILINX_MDM_0_SPLB_AWIDTH=32
> CONFIG_XILINX_MDM_0_SPLB_DWIDTH=32
> CONFIG_XILINX_MDM_0_SPLB_P2P=0
> CONFIG_XILINX_MDM_0_SPLB_MID_WIDTH=1
> CONFIG_XILINX_MDM_0_SPLB_NUM_MASTERS=2
> CONFIG_XILINX_MDM_0_SPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_MDM_0_SPLB_SUPPORT_BURSTS=0
> CONFIG_XILINX_MDM_0_OPB_DWIDTH=32
> CONFIG_XILINX_MDM_0_OPB_AWIDTH=32
> CONFIG_XILINX_MDM_0_MB_DBG_PORTS=1
> CONFIG_XILINX_MDM_0_USE_UART=1
> CONFIG_XILINX_MDM_0_UART_WIDTH=8
> CONFIG_XILINX_MDM_0_WRITE_FSL_PORTS=0
> CONFIG_XILINX_MDM_0_HW_VER="1.00.e"
> CONFIG_XILINX_MDM_0_INSTANCE="mdm_0"
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_BASEADDR=0x00000000
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_HIGHADDR=0x0000FFFF
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_MASK=0xC0000000
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_LMB_AWIDTH=32
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_LMB_DWIDTH=32
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_HW_VER="2.10.b"
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_INSTANCE="dlmb_cntlr"
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_BASEADDR=0x00000000
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_HIGHADDR=0x0000FFFF
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_MASK=0xC0000000
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_LMB_AWIDTH=32
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_LMB_DWIDTH=32
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_HW_VER="2.10.b"
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_INSTANCE="ilmb_cntlr"
> CONFIG_XILINX_INTC_0_FAMILY="virtex5"
> CONFIG_XILINX_INTC_0_BASEADDR=0x60000000
> CONFIG_XILINX_INTC_0_HIGHADDR=0x6FFFFFFF
> CONFIG_XILINX_INTC_0_SPLB_AWIDTH=32
> CONFIG_XILINX_INTC_0_SPLB_DWIDTH=32
> CONFIG_XILINX_INTC_0_SPLB_P2P=0
> CONFIG_XILINX_INTC_0_SPLB_NUM_MASTERS=2
> CONFIG_XILINX_INTC_0_SPLB_MID_WIDTH=1
> CONFIG_XILINX_INTC_0_SPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_INTC_0_SPLB_SUPPORT_BURSTS=0
> CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS=3
> CONFIG_XILINX_INTC_0_KIND_OF_INTR=0x00000003
> CONFIG_XILINX_INTC_0_KIND_OF_EDGE=0x00000003
> CONFIG_XILINX_INTC_0_KIND_OF_LVL=0x00000004
> CONFIG_XILINX_INTC_0_HAS_IPR=1
> CONFIG_XILINX_INTC_0_HAS_SIE=1
> CONFIG_XILINX_INTC_0_HAS_CIE=1
> CONFIG_XILINX_INTC_0_HAS_IVR=1
> CONFIG_XILINX_INTC_0_IRQ_IS_LEVEL=1
> CONFIG_XILINX_INTC_0_IRQ_ACTIVE=1
> CONFIG_XILINX_INTC_0_HW_VER="2.00.a"
> CONFIG_XILINX_INTC_0_INSTANCE="xps_intc_0"
> CONFIG_XILINX_TIMER_0_FAMILY="virtex5"
> CONFIG_XILINX_TIMER_0_COUNT_WIDTH=32
> CONFIG_XILINX_TIMER_0_ONE_TIMER_ONLY=0
> CONFIG_XILINX_TIMER_0_TRIG0_ASSERT=1
> CONFIG_XILINX_TIMER_0_TRIG1_ASSERT=1
> CONFIG_XILINX_TIMER_0_GEN0_ASSERT=1
> CONFIG_XILINX_TIMER_0_GEN1_ASSERT=1
> CONFIG_XILINX_TIMER_0_BASEADDR=0x80000000
> CONFIG_XILINX_TIMER_0_HIGHADDR=0x8000FFFF
> CONFIG_XILINX_TIMER_0_SPLB_AWIDTH=32
> CONFIG_XILINX_TIMER_0_SPLB_DWIDTH=32
> CONFIG_XILINX_TIMER_0_SPLB_P2P=0
> CONFIG_XILINX_TIMER_0_SPLB_MID_WIDTH=1
> CONFIG_XILINX_TIMER_0_SPLB_NUM_MASTERS=2
> CONFIG_XILINX_TIMER_0_SPLB_SUPPORT_BURSTS=0
> CONFIG_XILINX_TIMER_0_SPLB_NATIVE_DWIDTH=32
> CONFIG_XILINX_TIMER_0_HW_VER="1.01.a"
> CONFIG_XILINX_TIMER_0_INSTANCE="xps_timer_0"
> CONFIG_XILINX_TIMER_0_IRQ=2
> CONFIG_XILINX_LMB_BRAM_IF_CNTLR_NUM_INSTANCES=2
> CONFIG_XILINX_TIMER_NUM_INSTANCES=1
> CONFIG_XILINX_MPMC_NUM_INSTANCES=1
> CONFIG_XILINX_INTC_NUM_INSTANCES=1
> CONFIG_XILINX_MDM_NUM_INSTANCES=1
> CONFIG_XILINX_UARTLITE_NUM_INSTANCES=2
> CONFIG_NO_MMU=y
> CONFIG_PREEMPT=y
> CONFIG_LARGE_ALLOCS=y
> CONFIG_CMDLINE=""
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_BINFMT_FLAT=y
> CONFIG_NET=y
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_INET=y
> CONFIG_IP_FIB_HASH=y
> CONFIG_INET_XFRM_MODE_TRANSPORT=y
> CONFIG_INET_XFRM_MODE_TUNNEL=y
> CONFIG_INET_XFRM_MODE_BEET=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_MTD=y
> CONFIG_MTD_PARTITIONS=y
> CONFIG_MTD_CMDLINE_PARTS=y
> CONFIG_MTD_CHAR=y
> CONFIG_MTD_BLKDEVS=y
> CONFIG_MTD_BLOCK=y
> CONFIG_MTD_CFI=y
> CONFIG_MTD_GEN_PROBE=y
> CONFIG_MTD_CFI_ADV_OPTIONS=y
> CONFIG_MTD_CFI_NOSWAP=y
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> CONFIG_MTD_CFI_INTELEXT=y
> CONFIG_MTD_CFI_UTIL=y
> CONFIG_MTD_RAM=y
> CONFIG_MTD_COMPLEX_MAPPINGS=y
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_START=0x0
> CONFIG_MTD_PHYSMAP_LEN=0x0
> CONFIG_MTD_PHYSMAP_BANKWIDTH=2
> CONFIG_MTD_UCLINUX=y
> CONFIG_MTD_UCLINUX_EBSS=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=8192
> CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
> CONFIG_NETDEVICES=y
> CONFIG_SERIAL_UARTLITE=y
> CONFIG_SERIAL_UARTLITE_CONSOLE=y
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> CONFIG_HW_RANDOM=y
> CONFIG_XILINX_GPIO=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_XILINX_EDK=y
> CONFIG_EXT2_FS=y
> CONFIG_FS_POSIX_ACL=y
> CONFIG_ROMFS_FS=y
> CONFIG_DIRECTIO=y
> CONFIG_PROC_FS=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_CRAMFS=y
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_ACL_SUPPORT=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_UARTLITE_ADDRESS=0x00000000
> CONFIG_ZLIB_INFLATE=y
> CONFIG_IOMAP_COPY=y
> 
> 
> #USERLAND CONFIGS
> CONFIG_SYSTEM_MAC_ADDRESS="00:0a:35:00:22:01"
> CONFIG_SYSTEM_IP_ADDRESS="192.168.0.10"
> CONFIG_SYSTEM_SERVERIP_ADDRESS="192.168.0.1"
> CONFIG_SYSTEM_HOSTNAME="uclinux"
> CONFIG_SYSTEM_ROOT_PASSWD="root"
> CONFIG_SYSTEM_ROOTFS_CRAMFS=y
> CONFIG_SYSTEM_COPY_TO_TFTPBOOT=y
> CONFIG_SYSTEM_TFTPBOOT_DIR="/tftpboot"
> CONFIG_SYSTEM_PARTITION1_NAME="boot"
> CONFIG_SYSTEM_PARTITION1_SIZE=40000
> CONFIG_SYSTEM_PARTITION2_NAME="bootenv"
> CONFIG_SYSTEM_PARTITION2_SIZE=20000
> CONFIG_SYSTEM_PARTITION3_NAME="config"
> CONFIG_SYSTEM_PARTITION3_SIZE=20000
> CONFIG_SYSTEM_PARTITION4_NAME="image"
> CONFIG_SYSTEM_PARTITION4_SIZE=400000
> CONFIG_SYSTEM_PARTITION5_NAME="spare"
> CONFIG_SYSTEM_PARTITION5_SIZE=0
> CONFIG_SYSTEM_PARTITION6_NAME=""
> CONFIG_SYSTEM_PARTITION6_SIZE=0
> CONFIG_USER_INIT_INIT=y
> CONFIG_USER_OTHER_SH=y
> CONFIG_USER_SASH_REBOOT=y
> CONFIG_USER_SASH_SHUTDOWN=y
> CONFIG_USER_VERSION_VERSION=y
> CONFIG_USER_LOGIN_LOGIN=y
> CONFIG_USER_AGETTY_AGETTY=y
> CONFIG_USER_LOGIN_PASSWD=y
> CONFIG_LIB_ZLIB_FORCE=y
> CONFIG_USER_FLATFSD_FLATFSD=y
> CONFIG_USER_FLATFSD_AUTO=y
> CONFIG_USER_DHCPCD_NEW_DHCPCD=y
> CONFIG_USER_FTPD_FTPD=y
> CONFIG_USER_INETD_INETD=y
> CONFIG_USER_PING_PING=y
> CONFIG_USER_PORTMAP_PORTMAP=y
> CONFIG_USER_TELNETD_TELNETD=y
> CONFIG_USER_TELNETD_DOES_NOT_USE_OPENPTY=y
> CONFIG_USER_THTTPD_THTTPD=y
> CONFIG_USER_NET_TOOLS_HOSTNAME=y
> CONFIG_USER_NET_TOOLS_IFCONFIG=y
> CONFIG_USER_GPIO_TEST=y
> CONFIG_USER_HD_HD=y
> CONFIG_USER_FILEUTILS_CAT=y
> CONFIG_USER_FILEUTILS_CHMOD=y
> CONFIG_USER_FILEUTILS_CMP=y
> CONFIG_USER_FILEUTILS_CP=y
> CONFIG_USER_FILEUTILS_LN=y
> CONFIG_USER_FILEUTILS_MKDIR=y
> CONFIG_USER_FILEUTILS_MV=y
> CONFIG_USER_FILEUTILS_RM=y
> CONFIG_USER_FILEUTILS_TOUCH=y
> CONFIG_USER_SHUTILS_BASENAME=y
> CONFIG_USER_SHUTILS_DATE=y
> CONFIG_USER_SHUTILS_ECHO=y
> CONFIG_USER_SHUTILS_FALSE=y
> CONFIG_USER_SHUTILS_PWD=y
> CONFIG_USER_SHUTILS_TRUE=y
> CONFIG_USER_SHUTILS_UNAME=y
> CONFIG_USER_SYSUTILS_REBOOT=y
> CONFIG_USER_SYSUTILS_SHUTDOWN=y
> CONFIG_USER_SYSUTILS_FREE=y
> CONFIG_USER_SYSUTILS_HOSTNAME=y
> CONFIG_USER_SYSUTILS_KILL=y
> CONFIG_USER_SYSUTILS_PS=y
> CONFIG_USER_BUSYBOX_BUSYBOX=y
> CONFIG_USER_BUSYBOX_DD=y
> CONFIG_USER_BUSYBOX_GUNZIP=y
> CONFIG_USER_BUSYBOX_GUNZIP_UNCOMPRESS=y
> CONFIG_USER_BUSYBOX_IFCONFIG=y
> CONFIG_USER_BUSYBOX_IFCONFIG_STATUS=y
> CONFIG_USER_BUSYBOX_INSMOD=y
> CONFIG_USER_BUSYBOX_LSMOD=y
> CONFIG_USER_BUSYBOX_MODPROBE=y
> CONFIG_USER_BUSYBOX_RMMOD=y
> CONFIG_USER_BUSYBOX_2_6_MODULES=y
> CONFIG_USER_BUSYBOX_KILL=y
> CONFIG_USER_BUSYBOX_KILLALL=y
> CONFIG_USER_BUSYBOX_LOGIN=y
> CONFIG_USER_BUSYBOX_LS=y
> CONFIG_USER_BUSYBOX_LS_USERNAME=y
> CONFIG_USER_BUSYBOX_LS_TIMESTAMPS=y
> CONFIG_USER_BUSYBOX_LS_FILETYPES=y
> CONFIG_USER_BUSYBOX_LS_SORTFILES=y
> CONFIG_USER_BUSYBOX_LS_RECURSIVE=y
> CONFIG_USER_BUSYBOX_LS_FOLLOWLINKS=y
> CONFIG_USER_BUSYBOX_MOUNT=y
> CONFIG_USER_BUSYBOX_MOUNT_LOOP=y
> CONFIG_USER_BUSYBOX_NFSMOUNT=y
> CONFIG_USER_BUSYBOX_SHELL=y
> CONFIG_USER_BUSYBOX_MSH=y
> CONFIG_USER_BUSYBOX_SH_IS_MSH=y
> CONFIG_USER_BUSYBOX_COMMAND_EDITING=y
> CONFIG_USER_BUSYBOX_COMMAND_HISTORY=15
> CONFIG_USER_BUSYBOX_COMMAND_SAVEHISTORY=y
> CONFIG_USER_BUSYBOX_COMMAND_TAB_COMPLETION=y
> CONFIG_USER_BUSYBOX_COMMAND_USERNAME_COMPLETION=y
> CONFIG_USER_BUSYBOX_TAB_COMPLETION=y
> CONFIG_USER_BUSYBOX_USERNAME_COMPLETION=y
> CONFIG_USER_BUSYBOX_SH_STANDALONE_SHELL=y
> CONFIG_USER_BUSYBOX_SH_APPLETS_ALWAYS_WIN=y
> CONFIG_USER_BUSYBOX_SH_FANCY_PROMPT=y
> CONFIG_USER_BUSYBOX_SH_EXTRA_QUIET=y
> CONFIG_USER_BUSYBOX_TEST=y
> CONFIG_USER_BUSYBOX_TRUE_FALSE=y
> CONFIG_USER_BUSYBOX_UMOUNT=y
> CONFIG_USER_BUSYBOX_MOUNT_FORCE=y
> CONFIG_USER_BUSYBOX_UPTIME=y
> CONFIG_USER_BUSYBOX_VI=y
> CONFIG_USER_BUSYBOX_VI_COLON=y
> CONFIG_USER_BUSYBOX_VI_YANKMARK=y
> CONFIG_USER_BUSYBOX_VI_SEARCH=y
> CONFIG_USER_BUSYBOX_VI_READONLY=y
> CONFIG_USER_BUSYBOX_VI_SETOPTS=y
> CONFIG_USER_BUSYBOX_VI_SET=y
> CONFIG_USER_BUSYBOX_VI_WIN_RESIZE=y
> CONFIG_USER_BUSYBOX_WGET=y
> CONFIG_USER_BUSYBOX_WGET_STATUSBAR=y
> CONFIG_USER_BUSYBOX_VERBOSE_USAGE=y
> CONFIG_USER_BUSYBOX_AUTOWIDTH=y
> CONFIG_USER_BUSYBOX_HUMAN_READABLE=y
> CONFIG_USER_RAMIMAGE_NONE=y
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 

-- 
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
Follow-Ups:
- Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
  - From: Victor G.
References:
- [microblaze-uclinux] BUG: scheduling while atomic
  - From: Victor G.
- [microblaze-uclinux] Re: BUG: scheduling while atomic
  - From: Victor G.
- Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
  - From: Michal Simek
- Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
  - From: Victor G.
Prev by Date: Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
Next by Date: Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
Previous by thread: Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
Next by thread: Re: [microblaze-uclinux] Re: BUG: scheduling while atomic
Index(es):
- Date
- Thread