Re: [microblaze-uclinux] newbie question on xilinx_ll_temac.c u-boot driver

[L.Campora@xxxxxxxx]

Hi all,

I continue to have problems with my ml505 hard temac,
and sure
they come from my ISE 11.1 wizard-generated ml505
project
(I do not see any other reason for this..)

- u-boot is the lastest shapshot from petalogix repository
- sdk_repository for top application is the latest
from petalogix repository
- toolchain isn't in fact (I have microblaze-uclinux-gcc
3.4.1, and I had to revert the .rodata directive in the linker script,
but I
  dot'n think this can have a deep effect on
a single peripheral...)
- Xilinx ISE suite is 11.1.

I still download u-boot in memory via the USB cable
and XMD, but this again shouldn't be a major issue with the ethernet..

What happens is that I cannot ping a host: I can see
ARP packets sent from my ml505, I can see the pinged station replying to
the ARP,
sometimes I see the ml505 sending the ping, sometines
I don't, sometimes ml505 stucks after the reception of the ARP.

My question is: is there a place where I can find
some reference .msh and .mss for the ml505 ensuring me that hard temac
will work
properly on that project?

Thanks in advance, and don't hesitate to advice me
if Im out of topic with this request.

Bye

Luigi

>  Michal Simek <Michal.Simek@xxxxxxxxxxxxx>
wrote:
>
> Hi,
>
> L.Campora@xxxxxxxx wrote:
> > 
> > Michal,
> > is the driver yuu indicated me suitable also for Virtex5 Hard
TEMAC?
> > 
> > I'm using a ml505 board and I'm having lot of troubles when trying
to
> > use that peripheral from u-boot,
> > so I was wondering whether there's something different when dealing
with
> > V5 family..
>
> I use ml505 and there is no problem with this driver.
> 
> Regards,
> Michal





NOTA DI RISERVATEZZA
Questo messaggio e  i suoi allegati sono  destinati esclusivamente
alle persone in indirizzo e puo' contenere informazioni riservate.
Se  avete ricevuto  il  messaggio  per errore,  Vi  informiamo che
qualsiasi  utilizzo dei contenuti della presente e'  assolutamente
vietato.  Vi  invitiamo  a  rispedire  immediatamente  la mail  al
mittente e  a distruggere il messaggio. Per  qualsiasi dubbio,  Vi
invitiamo a contattarci rispondendo a webmaster@xxxxxxxx
      Grazie   www.sirti.it


CONFIDENTIALITY NOTICE
This  message  and its  attachments are  addressed  solely  to  the
persons above and may contain confidential information. If you have
received the message  in error,  be informed that any  use  of  the
content hereof is prohibited.  Please return it  immediately to the  
sender  and delete the  message. Should  you  have  any  questions,
please contact us by replying to  webmaster@xxxxxxxx
      Thank you   www.sirti.it