[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] newbie question on xilinx_ll_temac.c u-boot driver
Hi,
Childhood Hwang wrote:
> Hi Luigi:
>
> The attachment is work well with EDK10.01.03, ML506. I was using the
> petalinux-v0[1].40-rc1,
> It also cost me weeks to make it work, It's a little hard.
Why, my ...?
Michal
>
> Rgs.
> Childhood.
>
>
> 2009/8/24 <L.Campora@xxxxxxxx>:
>> Hi all,
>>
>> I continue to have problems with my ml505 hard temac, and sure
>> they come from my ISE 11.1 wizard-generated ml505 project
>> (I do not see any other reason for this..)
>>
>> - u-boot is the lastest shapshot from petalogix repository
>> - sdk_repository for top application is the latest from petalogix repository
>> - toolchain isn't in fact (I have microblaze-uclinux-gcc 3.4.1, and I had to
>> revert the .rodata directive in the linker script, but I
>> dot'n think this can have a deep effect on a single peripheral...)
>> - Xilinx ISE suite is 11.1.
>>
>> I still download u-boot in memory via the USB cable and XMD, but this again
>> shouldn't be a major issue with the ethernet..
>>
>> What happens is that I cannot ping a host: I can see ARP packets sent from
>> my ml505, I can see the pinged station replying to the ARP,
>> sometimes I see the ml505 sending the ping, sometines I don't, sometimes
>> ml505 stucks after the reception of the ARP.
>>
>> My question is: is there a place where I can find some reference .msh and
>> .mss for the ml505 ensuring me that hard temac will work
>> properly on that project?
>>
>> Thanks in advance, and don't hesitate to advice me if Im out of topic with
>> this request.
>>
>> Bye
>>
>> Luigi
>>
>>> Michal Simek <Michal.Simek@xxxxxxxxxxxxx> wrote:
>>>
>>> Hi,
>>>
>>> L.Campora@xxxxxxxx wrote:
>>>> Michal,
>>>> is the driver yuu indicated me suitable also for Virtex5 Hard TEMAC?
>>>>
>>>> I'm using a ml505 board and I'm having lot of troubles when trying to
>>>> use that peripheral from u-boot,
>>>> so I was wondering whether there's something different when dealing with
>>>> V5 family..
>>> I use ml505 and there is no problem with this driver.
>>>
>>> Regards,
>>> Michal
>>
>>
>>
>>
>> NOTA DI RISERVATEZZA
>> Questo messaggio e i suoi allegati sono destinati esclusivamente
>> alle persone in indirizzo e puo' contenere informazioni riservate.
>> Se avete ricevuto il messaggio per errore, Vi informiamo che
>> qualsiasi utilizzo dei contenuti della presente e' assolutamente
>> vietato. Vi invitiamo a rispedire immediatamente la mail al
>> mittente e a distruggere il messaggio. Per qualsiasi dubbio, Vi
>> invitiamo a contattarci rispondendo a webmaster@xxxxxxxx
>> Grazie www.sirti.it
>>
>>
>> CONFIDENTIALITY NOTICE
>> This message and its attachments are addressed solely to the
>> persons above and may contain confidential information. If you have
>> received the message in error, be informed that any use of the
>> content hereof is prohibited. Please return it immediately to the
>> sender and delete the message. Should you have any questions,
>> please contact us by replying to webmaster@xxxxxxxx
>> Thank you www.sirti.it
>>
>>
>>
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/