Re: [microblaze-uclinux] Boot Problem

[Torin Ford <torin@xxxxxxxxxxxx>]

Yep, got the caches enabled.

Thanks,

Torin Ford
Software Engineer
nextScan, Inc.

On Wed, 2009-08-26 at 13:49 -0700, Aws Ismail wrote:
> sorry got the name wrong. typing too fast. I apologize, Torin.
> 
> Regards.
> 
> On Wed, Aug 26, 2009 at 1:48 PM, Aws Ismail <aws.ismail@xxxxxxxxx>
> wrote:
>         Hi Tom,
>         
>         make sure caches are enabled. I was facing this problem when
>         using the XUPV2P board but have not been able to figure it
>         out. I moved to a different board (Spartan3A 1800) and
>         everything works fine.
>         
>         Regards.
>         
>         
>         
>         On Wed, Aug 26, 2009 at 12:08 PM, Torin Ford
>         <torin@xxxxxxxxxxxx> wrote:
>                 I have a boot problem.  I remember seeing someone else
>                 mail about it
>                 recently but can't seem to find the messages in the
>                 archive.  The
>                 problem is this - Boot up the system, a first stage
>                 boot loader loads
>                 u-boot into RAM, then jumps to it.  u-boot runs, and
>                 sees that there is
>                 an autoboot image available, so it loads that image
>                 and jumps to it.
>                 The image is a linux kernel image and outputs:
>                 
>                 #### klimit 8c1fa000 ####
>                 Moving 0x000e4000 bytes from 0x8c1e208c to 0x8c1f98f0
>                 New klimit: 0x8c2de000
>                 
>                 At this point, it appears to reset, as the first stage
>                 boot loader runs.
>                 Could the flash partition ordering and the absence of
>                 the "config" and
>                 "spare" partitions cause this?
>                 
>                 Thanks,
>                 
>                 Torin Ford
>                 Software Engineer
>                 nextScan, Inc.
>                 ___________________________
>                 microblaze-uclinux mailing list
>                 microblaze-uclinux@xxxxxxxxxxxxxx
>                 Project Home Page :
>                 http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>                 Mailing List Archive :
>                 http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>                 
>         
>         
>         
>         
>         -- 
>         Aws Ismail, BASc. EE
>         
>         MASc. Candidate
>         Mechatronic Systems Engineering
>         Simon Fraser University
>         250-13450 102 Avenue
>         Surrey BC V3T 0A3
>         ---------
> 
> 
> 
> -- 
> Aws Ismail, BASc. EE
> 
> MASc. Candidate
> Mechatronic Systems Engineering
> Simon Fraser University
> 250-13450 102 Avenue
> Surrey BC V3T 0A3
> 
> ---------
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/