[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re: [microblaze-uclinux] newbie question on xilinx_ll_temac.c u-boot driver
Hi Childhood,
I meet a problem on ll_temac when using u-boot.
Did you change anything of the petalinux-v0[1].40-rc1?
Regards,
Jerry
> -----原始邮件-----
> 发件人: "Childhood Hwang" <childhood.hwang@xxxxxxxxx>
> 发送时间: 2009年8月25日 星期二
> 收件人: microblaze-uclinux@xxxxxxxxxxxxxx
> 抄送:
> 主题: Re: [microblaze-uclinux] newbie question on xilinx_ll_temac.c u-boot
driver
>
> Hi Luigi:
>
> The attachment is work well with EDK10.01.03, ML506. I was using the
> petalinux-v0[1].40-rc1,
> It also cost me weeks to make it work, It's a little hard.
>
> Rgs.
> Childhood.
>
>
> 2009/8/24 <L.Campora@xxxxxxxx>:
> >
> > Hi all,
> >
> > I continue to have problems with my ml505 hard temac, and sure
> > they come from my ISE 11.1 wizard-generated ml505 project
> > (I do not see any other reason for this..)
> >
> > - u-boot is the lastest shapshot from petalogix repository
> > - sdk_repository for top application is the latest from petalogix repository
> > - toolchain isn't in fact (I have microblaze-uclinux-gcc 3.4.1, and I had to
> > revert the .rodata directive in the linker script, but I
> > dot'n think this can have a deep effect on a single peripheral...)
> > - Xilinx ISE suite is 11.1.
> >
> > I still download u-boot in memory via the USB cable and XMD, but this again
> > shouldn't be a major issue with the ethernet..
> >
> > What happens is that I cannot ping a host: I can see ARP packets sent from
> > my ml505, I can see the pinged station replying to the ARP,
> > sometimes I see the ml505 sending the ping, sometines I don't, sometimes
> > ml505 stucks after the reception of the ARP.
> >
> > My question is: is there a place where I can find some reference .msh and
> > .mss for the ml505 ensuring me that hard temac will work
> > properly on that project?
> >
> > Thanks in advance, and don't hesitate to advice me if Im out of topic with
> > this request.
> >
> > Bye
> >
> > Luigi
> >
> >> Michal Simek <Michal.Simek@xxxxxxxxxxxxx> wrote:
> >>
> >> Hi,
> >>
> >> L.Campora@xxxxxxxx wrote:
> >> >
> >> > Michal,
> >> > is the driver yuu indicated me suitable also for Virtex5 Hard TEMAC?
> >> >
> >> > I'm using a ml505 board and I'm having lot of troubles when trying to
> >> > use that peripheral from u-boot,
> >> > so I was wondering whether there's something different when dealing with
> >> > V5 family..
> >>
> >> I use ml505 and there is no problem with this driver.
> >>
> >> Regards,
> >> Michal
> >
> >
> >
> >
> >
> > NOTA DI RISERVATEZZA
> > Questo messaggio e i suoi allegati sono destinati esclusivamente
> > alle persone in indirizzo e puo' contenere informazioni riservate.
> > Se avete ricevuto il messaggio per errore, Vi informiamo che
> > qualsiasi utilizzo dei contenuti della presente e' assolutamente
> > vietato. Vi invitiamo a rispedire immediatamente la mail al
> > mittente e a distruggere il messaggio. Per qualsiasi dubbio, Vi
> > invitiamo a contattarci rispondendo a webmaster@xxxxxxxx
> > Grazie www.sirti.it
> >
> >
> > CONFIDENTIALITY NOTICE
> > This message and its attachments are addressed solely to the
> > persons above and may contain confidential information. If you have
> > received the message in error, be informed that any use of the
> > content hereof is prohibited. Please return it immediately to the
> > sender and delete the message. Should you have any questions,
> > please contact us by replying to webmaster@xxxxxxxx
> > Thank you www.sirti.it
> >
> >
> >
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/