Re: [microblaze-uclinux] Changing from S3E500 to 1600

[Torin Ford <torin@xxxxxxxxxxxx>]

On Thu, 2009-08-27 at 14:14 +0100, Paulo Ferreira wrote:
> drivers/input/keypaddev.c:115: error:  
> `CONFIG_XILINX_BTN_DECODER_0_BASEADDR' undeclared here (not in a  
> function)
> 
> 
> So after a liile research  I found that  the definition of the  
> symbol   CONFIG_XILINX_BTN_DECODER_0_BASEADDR is found on these files:
> 
> 
> ./software/uClinux-2.4.x/arch/microblaze/platform/Xilinx-Spartan3E1600- 
> RevA/auto-config.in
> ./software/uClinux-2.4.x/arch/microblaze/platform/Xilinx-Spartan3E500- 
> RevD/auto-config.in
> 
> 
> and by the magical wonder of Petalinux scripts goes to the file
> 
> ./software/linux-2.6.x-petalogix/include/linux/autoconf.h
> 
> when one executes    "make dep"
> 
> 
> But  this happens only when on  Xilinx-Spartan3E500-RevD,   not on   
> Xilinx-Spartan3E1600-RevA..
> 
> 
> Has anyone got any more clues?
> 

Just a guess here, but I'm assuming you went through the BSB to setup
your hardware platform?  If so, during that process you had the option
to add/remove the buttons.  It appears that you chose to remove them.

Torin Ford
Software Engineer
nextScan, Inc.
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/