On 25 September 2009 at 14:05, in message
<A7312F60A82F4E62917CABA26BD1250C@xxxxxxxxxxxxx>, Orlando Landrove
Gámez
<landrove@xxxxxxxxxx> wrote:
Hi,
Is there anybody who has used UART-DTE Spartan3E500E Starter Board
?....Please, here below is my problem, I 'am following some
tutorials and
they all take me to Uart-DTE serial connection to PC-serial port. But
there
is no "words" on my serial console...if anyone have some secret, I'm
doing
what there is below, but no getting words. I mean. the first step,
only edk
reference step, is not giving me fsboot answer, so no posibility to
cat
/tftboot/u-boot.srec > /dev/ttyS0...
Hi Orlando,
Some questions which might help:
Are you sure your cable is OK? And that you have Tx and Rx the right
way around?
Can you put an oscilloscope on the pins and see if anything is coming
out of the board when you boot it?
How are you getting the bitstream into the FPGA?
Cheers,
Martin
--
Martin Thompson CEng MIET
TRW Conekt, Stratford Road, Solihull, B90 4GW. UK
+44 (0)121-627-3569 : martin.j.thompson@xxxxxxx
http://www.conekt.net/
Conekt is a trading division of TRW Limited
Registered in England, No. 872948
Registered Office Address: Stratford Road, Solihull B90 4AX
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/