Re: [partial-reconfig] partial-reconfig: Bus macro problem

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi John,

jedward@lme.usp.br wrote:
>      I have a doubt about this problem. If I use a hard bus macro to
>      communicate static modules A and C, while B is reconfiguring. How can
>      i be sure that a hard bus macro inside module B is not part of
>      reconfiguration frame?. Is it possivel? or always that I remove the
>      module B, a hard bus macro across the module B is removed too?

My understanding is that the hard macro *will* be part of the 
reconfiguration frame, however since the reconfiguration is 
"glitch-free", and the original and new configuration for that resource 
are the same, the communications between the two modules should be 
uninterrupted.  I've never tried it, but that's the theory.

Regards,

John
___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/