Re: [partial-reconfig]

["karel.bruneel@xxxxxxxxxx" <karel.bruneel@xxxxxxxxxx>]

Hi all,

I succeded in making a design which partially reconfigures the fpga of the
ml310 board via the ICAP. The files are read from the sysace with a 
microblaze and written to the ICAP with the opb_hwicap. To be able to use the
sysace I had to put a macro over the module that is beeing reconfigurated 
which connects the microblaze with the ICAP. At first sight it works very 
well (just finished it today so not a lot of testing has been done). The only 
bug that I found until now is that when uploading the partial bitstream of 
the module that is in the full bitstream does not work. You can find my 
design files at:

http://www.elis.ugent.be/~kbruneel/ICAP_MB_3.zip

It still is very messy, but it works. Look in the demo subdir to find some 
bitstreams.

Any feedback will be much appreciated. Certainly improvements to the design.

Regards,
Karel Bruneel


___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/