Re: [partial-reconfig]

[Ron Sass <rsass@xxxxxxxxxxx>]

Cool Karel!  That's very similar to what we're trying to do here...but
we've been getting stuck on the EDK+ModularDesign.  I'm hoping we can
learn from your example which we've promptly downloaded ;-)

Quick question:  why did you choose a MB instead of the PPC?

Ron

> Hi all,
> 
> I succeded in making a design which partially reconfigures the fpga of the
> ml310 board via the ICAP. The files are read from the sysace with a 
> microblaze and written to the ICAP with the opb_hwicap. To be able to use the
> sysace I had to put a macro over the module that is beeing reconfigurated 
> which connects the microblaze with the ICAP. At first sight it works very 
> well (just finished it today so not a lot of testing has been done). The only
>  
> bug that I found until now is that when uploading the partial bitstream of 
> the module that is in the full bitstream does not work. You can find my 
> design files at:
> 
> http://www.elis.ugent.be/~kbruneel/ICAP_MB_3.zip
> 
> It still is very messy, but it works. Look in the demo subdir to find some 
> bitstreams.
> 
> Any feedback will be much appreciated. Certainly improvements to the design.
> 
> Regards,
> Karel Bruneel
___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/