[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [partial-reconfig]

Hi,

Quick question:  why did you choose a MB instead of the PPC?

I first started out using a PPC but it seems that that the left PPC can only be used in conjunction with the right one. I also thought that it might be possible to save some place for the reconfigurable module, but since the microblaze is a macro (I think)and the sysace pins are spread over the left top side I'me not saving any place.

If you make some inprovements please let me know.

Regards,
Karel

>----- Oorspronkelijk bericht -----
>Van
: Ron Sass [mailto:rsass@ittc.ku.edu]
>Verzonden
: dinsdag
, maart
 15, 2005 11:44 PM
>Aan
: partial-reconfig@itee.uq.edu.au
>Onderwerp
: Re: [partial-reconfig]
>
>
>Cool Karel!  That's very similar to what we're trying to do here...but
>we've been getting stuck on the EDK+ModularDesign.  I'm hoping we can
>learn from your example which we've promptly downloaded ;-)
>
>Quick question:  why did you choose a MB instead of the PPC?
>
>Ron
>
>> Hi all,
>> 
>> I succeded in making a design which partially reconfigures the fpga of the
>> ml310 board via the ICAP. The files are read from the sysace with a 
>> microblaze and written to the ICAP with the opb_hwicap. To be able to use the
>> sysace I had to put a macro over the module that is beeing reconfigurated 
>> which connects the microblaze with the ICAP. At first sight it works very 
>> well (just finished it today so not a lot of testing has been done). The only
>>  
>> bug that I found until now is that when uploading the partial bitstream of 
>> the module that is in the full bitstream does not work. You can find my 
>> design files at:
>> 
>> http://www.elis.ugent.be/~kbruneel/ICAP_MB_3.zip
>> 
>> It still is very messy, but it works. Look in the demo subdir to find some 
>> bitstreams.
>> 
>> Any feedback will be much appreciated. Certainly improvements to the design.
>> 
>> Regards,
>> Karel Bruneel
>___________________________
>partial-reconfig mailing list
>partial-reconfig@itee.uq.edu.au
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>
>



___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/