Re: [partial-reconfig] Problem with xc2v1000 board

["Umar Mushtaq" <misfit_05@xxxxxxxxxxx>]

Other problems with the .ucf file:

1). The MODE=RECONFIG constraint should do for RTR designs in ISE 6.1
and later... the other constraints i.e. CLOSED etc are redundant...
2). The .ucf file lists the ranges for Slices and TBUFs in an Area
Group, but not the RAMs and the MULTs...
3). I didn't see any constraints for the BMs...

Instead of running scripts, why not come up with your own simple design?

Documents that you could use, and probably already have:

1). The Xilinx Application Note 290
2). Xilinx Development Systems Reference Guide, Chapter 4
3). Gregory Mermoud's tutorial on RTR 

Sincerely,
Umar

P.S. Speaking of boards, may I ask which board you'll be using? Any
specific reasons for going for this particular board? I would appreciate
details... :) ...
___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/