RE: [partial-reconfig] Problem with xc2v1000 board

["Kehuai Wu" <kw@xxxxxxxxxx>]

Actually the constraint "MODE=RECONFIG" enforces the routing to be inside of
the area-group. Even if a module is fixed, if you don't want its routing to
spread into the reconfigurable unit area, you still need to specify it as
reconfigurable. 

BR

Kehuai Wu, kw@imm.dtu.dk

Department of Informatics and Mathematical Modelling   

Technical University of Denmark   Building 322

DK-2800 Kgs. Lyngby , Denmark

Phone:  +45 4525 3728

Fax:    +45 4593 0074

 

 


-----Original Message-----
From: owner-partial-reconfig@itee.uq.edu.au
[mailto:owner-partial-reconfig@itee.uq.edu.au] On Behalf Of Umar Mushtaq
Sent: 21. april 2005 14:44
To: partial-reconfig@itee.uq.edu.au
Subject: Re: [partial-reconfig] Problem with xc2v1000 board

Weren't all modules in an RTR supposed to have the MODE=RECONFIG
constraint, even the fixed ones?

Sincerely,
Umar
___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/


___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/