Re: [partial-reconfig] Bi directional bus macro?

[Jens Thorvinger <jens@xxxxxxxxxxxxx>]

Unfortunately I don't know any XDL reference. If I remember it right, I 
did most of the programming with the help of reversed-engineering from 
the output of the FPGA-editor.

/Jens

Ian Colwill wrote:

> Thanks for your reply Jens, you have achieved exactly what I wanted 
> to. I think some additional study of XDL is required as I am obviously 
> missing something. Either that or the Spartan 2 does not allow the 
> output of more than 2 TBUFs to be linked and the virtex does (I think 
> this is unlikely however!). Do you know of any good XDL reference?
>
>
> Jens Thorvinger wrote:
>
>> Hi Ian,
>>
>> Yes. About a year ago when I did my final thesis I built a 
>> bidirectional bus macro. I hope my thesis can help you out. 
>> Unfortunately, it was a while ago and I am not sure I can help you 
>> much more than my report does. But I can try if you need more help.
>>
>> Best Regards
>> /Jens
>
>
>
> ___________________________
> partial-reconfig mailing list
> partial-reconfig@itee.uq.edu.au
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/partial-reconfig/



___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/