Re: [partial-reconfig] Bi directional bus macro?

[Ian Colwill <I.Colwill@xxxxxxxxxxxx>]

I'm in the process of doing the same thing now. Thanks for your input.

Ian,

Jens Thorvinger wrote:

> Unfortunately I don't know any XDL reference. If I remember it right, 
> I did most of the programming with the help of reversed-engineering 
> from the output of the FPGA-editor.
>
> /Jens
>
> Ian Colwill wrote:
>
>> Thanks for your reply Jens, you have achieved exactly what I wanted 
>> to. I think some additional study of XDL is required as I am 
>> obviously missing something. Either that or the Spartan 2 does not 
>> allow the output of more than 2 TBUFs to be linked and the virtex 
>> does (I think this is unlikely however!). Do you know of any good XDL 
>> reference?
>>
>>
>> Jens Thorvinger wrote:
>>
>>> Hi Ian,
>>>
>>> Yes. About a year ago when I did my final thesis I built a 
>>> bidirectional bus macro. I hope my thesis can help you out. 
>>> Unfortunately, it was a while ago and I am not sure I can help you 
>>> much more than my report does. But I can try if you need more help.
>>>
>>> Best Regards
>>> /Jens
>>
>>
>>
>>
>> ___________________________
>> partial-reconfig mailing list
>> partial-reconfig@itee.uq.edu.au
>> Mailing List Archive : 
>> http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>
>
>
>
> ___________________________
> partial-reconfig mailing list
> partial-reconfig@itee.uq.edu.au
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>

___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/