[partial-reconfig] Error in ISE6.3 PAR

[yilu@xxxxxxxxxxxxxx]

Hi, all

There is an error when I use par in the assemble stage. I am now using ISE6.3
with service pack2. Could anyone give me some advices?

Thank you

luyi

Error message:
**************************************************************
Phase 3: 2 unrouted;       REAL time: 4 mins 52 secs

Phase 4: 2 unrouted; (0)      REAL time: 4 mins 53 secs

Phase 5: 2 unrouted; (0)      REAL time: 4 mins 53 secs

Phase 6: 2 unrouted; (0)      REAL time: 4 mins 54 secs

Phase 7: 0 unrouted; (0)      REAL time: 4 mins 56 secs

FATAL_ERROR:Ncd:basncsignal.c:283:1.39.8.2 - Could not find a bel for a signal
   on pin F3 of comp mb_system/dlmb_LMB_Ready.  Its current programmed state is
   : YUSED:0 XUSED:0 DYMUX:1 F:#LUT:D=((A2*~A4)+A1) FXMUX:F SYNC_ATTR:ASYNC
   SRFFMUX:0 FFY_SR_ATTR:SRLOW FFY:#FF GYMUX:G FFY_INIT_ATTR:INIT0
   G:#LUT:D=(~A3*((A1*~A4)+A2)) CEINV:CE CLKINV:CLK SRINV:SR   Process will
   terminate.  To resolve this error, please consult the Answers Database and
   other online resources at http://support.xilinx.com. If you need further
   assistance, please open a Webcase by clicking on the "WebCase" link at
   http://support.xilinx.com



___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/