Re: [partial-reconfig] mb+icap controller (karels design).

[Will Hua Zheng <Hua.Zheng@xxxxxxxxxxxx>]

Lakshmi Narasimhan. S wrote:

>Hello all,
>I am currently trying out using ICAP primitive usage through
>a microblaze core.
>>From this list archives I found Karel Brunnel has a design
>on ml310. I copied the files and have been working through it,
>to understand the design.
>
>I have one question.
>During the active phase, how does one proceed through for
>the system build using xdk?
>
>This is what I followed.
>>From EDK, I exported to project navigator.
>Then set the synthesis settings accordingly.
>Then synthesized system alone( not the system_stub which is the top
>level within the projnav). Collected the ngc files and used
>them along with other ngc automatically generated during
>build libraries under implementation directory. (these ngc
>files are not synthesized under these options, are they okay?)
>
>Once all these files are created I put them under a directory.
>Then I called ngdbuild, map, both works fine.
>But with par, I find placement okay, but routing doesnt proceed
>nor report errors. Its just hung with routing in phase 2.
>
>Can someone let me know as to how to create the active module for
>systems created using EDK? Anything I missed.
>
>I wish Karel Brunnel sees this message as it should be much easier
>for him to respond.
>
>Thanks
>LN
>___________________________
>partial-reconfig mailing list
>partial-reconfig@itee.uq.edu.au
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>
>
>  
>
For how long did you let the router run? Which version of EDK are you 
using? What type of processor and memory do you have on your workstation?

-- 
WILL HUA ZHENG
3452 - TEST SYSTEMS ENGINEERING
JET PROPULSION LABORATORY
818-354-2974
Hua.Zheng@jpl.nasa.gov


___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/