Re: [partial-reconfig] Multimedia Board partial reconfiguration

[Arnaud Lagger <arnaud.lagger@xxxxxxx>]

No thanks, my job is over :)

In fact there is no problem with DPR on the Xilinx Multimedia Board if 
you do it externally (or SystemACE).
However, if you do it internally (by using the ICAP port), you have to 
disable a resistor on the board (as the configuration mode is hardcoded 
to boundary scan mode which disables ICAP).

Anyway, thanks for you help proposal.

Arnaud

Arkan Khalaf a écrit :
> Hello,
>  
> Do you still need help with this ?
>  
> Thanks...Arkan
>
>  
> On 12/16/05, *arnaud.lagger@xxxxxxx <mailto:arnaud.lagger@xxxxxxx>* 
> <arnaud.lagger@xxxxxxx <mailto:arnaud.lagger@xxxxxxx>> wrote:
>
>     Hello,
>
>     Did someone already performed DPR (either difference-based or
>     module-based) on
>     the Xilinx Multimedia Board? Is there something to take care of?
>     I already did DPR on a custom board (Virtex-II based, too) but DPR
>     seems to have
>     no effect with the Multimedia Board.
>
>     Thanks,
>
>     Arnaud Lagger
>     ___________________________
>     partial-reconfig mailing list
>     partial-reconfig@xxxxxxxxxxxxxx <mailto:partial-reconfig@xxxxxxxxxxxxxx>
>     Mailing List Archive :
>     http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>     <http://www.itee.uq.edu.au/~listarch/partial-reconfig/>

___________________________
partial-reconfig mailing list
partial-reconfig@xxxxxxxxxxxxxx
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/